Skip to content
GUOCUI BIO TECH Skincare OEM/ODM

Private Label Ice-Cool Mint Lemon Underarm Scrub 150 g – OEM/ODM Manufacturer

Direct answer: this reference is an ice-cool underarm scrub in a 150 g / 5.29 oz clear PET jar with a brushed-silver screw cap, printed Ice-Cool Mint Lemon Underarm Scrub over a mint, eucalyptus and soft lavender scent direction, with a blank logo panel for private-label artwork. The sales board around the packshot also carries copy — strong odour control, boosts deodorant performance, cooling intensity stars, six-hour freshness — and that wording is packaging and campaign copy, not a test result. The folder holds packshots only: no formula sheet, no assay, no patch test, no certificate. This page therefore publishes no active percentage, no pH and no measured effect. Guangzhou Guocui Biological Technology Co., Ltd. handles filling, labelling and export packing for this format in Guangzhou.

Next step: request a private label quote for this scrub, or send the market, jar size and label direction to the Guocui team.

Private label ice-cool mint lemon underarm scrub: 150 g clear PET jar with a brushed silver screw cap and a label printed Ice-Cool Mint Lemon Underarm Scrub with a blank logo panel
The reference unit: a 150 g clear PET jar with a brushed-silver screw cap, a pale blue scrub base, and a wrap label carrying the mint-lemon-eucalyptus name line, the scent descriptor and a blank logo panel.

Product positioning

Underarm scrubs usually arrive as a side note on a body-care shelf: one grit, one fragrance, one 300 g tub that the shopper buys once and never finishes. This jar is built the other way round. It starts from a routine rather than a category — the step a person takes in the shower before deodorant — and the format, the fill and the scent map are chosen to sit inside that routine.

Two decisions carry the positioning. The first is the 150 g fill. It reads as a grooming product rather than a bath product: small enough for a gym bag or a carry-on, repeat-purchase sized, and cheap to try. The second is the scent architecture. Mint leads, eucalyptus sits in the middle, soft lavender closes it, which gives the jar a cooling, herbal, slightly male-coded signature instead of the fruit-and-sugar profile that dominates the scrub aisle.

That combination points at a buyer who is not shopping for exfoliation in general. He or she is shopping for a shower step that makes a deodorant work on skin that sweats. The label answers this without promising a medical outcome: it names the areas, it names the sensation, and it leaves the mechanism to the formula brief. Whether the cooling is a genuine formulation effect or only a fragrance impression is a project decision, and the two routes cost different amounts to substantiate.

Why the jar, not the tube

A jar lets the buyer see the scrub base and the particle load, which is the whole visual argument of an exfoliant. It also allows a heavier, wetter base that a tube would struggle to dispense. The trade-off is hygiene in a wet room, which is why the closure, the wiper and the fill temperature matter more here than on a lotion. For a brand that sells on texture, the jar wins; for a brand that sells on portability and one-handed use, a tube is the better start and should be decided before the artwork is drawn.

Suitable buyers

This format usually suits six kinds of buyer, and the brief differs for each one.

  • Men’s grooming startups building a shower-to-deodorant line who need one SKU that links the two steps without a medical claim.
  • Gym, studio and sports retail buying a small, repeatable shower item for a post-training routine, where the 150 g fill fits a locker or a kit bag.
  • Pharmacy and dermo-cosmetic chains that want a fragrance-led exfoliant next to the deodorant set, with the area naming doing the shelf work.
  • Travel, hotel and amenity programmes that need a compact jar with a robust cap and a shrink band for handling.
  • Hot-climate distributors in markets where daily showering and high humidity make a cooling, rinse-off step easy to explain at shelf.
  • Subscription and gift-box operators who need a low unit weight, a strong shelf silhouette and a label that survives a mailer.

Buyers who already sell a general body scrub should read this jar as an extension rather than a replacement: the area claim, the fill and the scent direction are all different, and the two pages can sit in one collection without competing for the same search phrase.

SEO and buyer keywords

The phrases this page is written around are the ones a sourcing manager or a brand owner actually types: ice cool underarm scrub private label, mint lemon underarm scrub OEM, men’s body scrub manufacturer China, deodorant-compatible scrub supplier, 150 g PET jar scrub wholesale, eucalyptus lavender scrub OEM, high-sweat area exfoliant private label and body care OEM Guangzhou. Each appears where it belongs in the copy rather than in a list, because a page stuffed with variants reads as spam to a buyer and adds nothing to a machine either.

The natural long-tail here is procedural, not descriptive. Buyers search for how to brief a scrub, how to choose an exfoliation system, what a claim needs before it can print, and what changes when a jar size moves. Those questions are answered in the sections below and in the linked guides, which is also what makes the page useful as a reference rather than only as a listing.

Custom formula directions

Four variables are set in the brief before any sample is made, and each one changes the cost and the claim set.

Exfoliation system

Sugar gives a dissolving, softer scrub and a sweeter base note; salt gives a sharper, saltier feel and needs a corrosion check on the cap; jojoba esters and silica give a synthetic, uniform particle that holds its shape in a jar. The particle size and load decide whether the product reads as a body polish or an area scrub, and both are recorded in the specification rather than on the label.

Cooling route

Cooling can come from the fragrance alone, or from a cooling agent such as menthol or menthyl lactate, or from a eucalyptus-forward oil blend. The three routes differ in intensity, in duration and in what they cost to support. A cooling agent needs a use-level check against the destination market and a sensory panel if the label claims an intensity; a fragrance-only route needs no such support but delivers a shorter impression.

Surfactant and rinse profile

A scrub that rinses clean in a shower needs a surfactant system tuned to the oil phase, otherwise it leaves a film that reads as poor quality on skin. The rinse target, the foam level and the residue are agreed in the sample round, because they cannot be corrected at fill.

Fragrance and allergen declaration

A mint, eucalyptus and lavender direction almost always carries declarable fragrance allergens — limonene, linalool and citral are the usual ones — and the declaration depends on the finished formula and the destination market, not on the scent name. The allergen list is fixed after the fragrance is locked, and the label is proofed against it.

Odour-control wording sits outside the formula brief. A phrase such as neutralises odour at the source is a claim that needs evidence for the specific formula, and until that evidence exists the label should describe the product rather than the outcome.

Packaging options

The standard build is a 150 g clear PET jar with a brushed-silver aluminium-look screw cap and a pressure-sensitive wrap label. From there the component list can move in several directions, and the choice usually follows the artwork budget more than the formula.

  • Resin: virgin PET for clarity, or PCR PET where the brand needs a recycled-content story and accepts a slightly warmer tone.
  • Fill range: 100 g for travel and amenity, 150 g as the reference, 200 g or 250 g for a family or salon tub. Each jump changes the label area and the carton count.
  • Decoration: pressure-sensitive label for short runs, in-mould label for a no-edge look at higher volume, or direct print where the jar surface allows it.
  • Closure: brushed silver, matte black or colour-matched cap; an induction seal or a shrink band for transit and tamper evidence.
  • In-pack: a small spatula, a leaflet, or a folded carton with the routine printed inside.
  • Export packing: shrink-wrapped trays, master carton with market-specific marking, and a polybag option for humid routes.

Because the label on a 150 g jar is small, the copy hierarchy has to be settled early. Name line, area descriptor, scent line, net weight and allergen statement compete for the same few square centimetres, and a claim added late usually pushes the net weight off the visible panel.

Sample and QC workflow

A project on this format moves through six gates, and nothing is ordered at fill until the fifth one is signed.

  1. Brief. Market, area claim, jar size, fill weight, scent direction and target price band are fixed in writing.
  2. Formula direction. The exfoliation system, cooling route, surfactant level and preservation system are named before a sample exists.
  3. Lab sample. A bench batch is made in the proposed jar so texture and rinse behaviour are judged in the real geometry.
  4. Buyer evaluation. The buyer tests in the intended context — a shower, a gym bag, a humid bathroom — and returns written comments rather than a score.
  5. Specification lock. Particle size, viscosity, pH, fill weight, fragrance load and allergen list are recorded, and the artwork is proofed against that document.
  6. Pilot and production. A pilot run confirms fill weight, label placement and cap torque; the production batch is checked against the same specification.

Routine checks for this format are stability under accelerated and ambient conditions, compatibility with the jar and the liner, microbiological testing, fill-weight verification and a label-adhesion check after a humidity cycle. Where a cooling-intensity or odour-control claim is intended, the supporting sensory or consumer study is commissioned separately, because it is a claim decision rather than a line check. Guangzhou Guocui Biological Technology Co., Ltd. runs these steps per project; no certificate number, test value or audit grade is reproduced here for this reference.

MOQ and quotation

No minimum, price or lead time is published here, because on a jar product the floor is set by the least flexible component. A stock jar with a paper label, an in-mould jar and a colour-matched cap each carry a different threshold, and a shrink band or a printed carton adds another. Quotation therefore follows the component list, not the scrub.

A first reply is a feasibility note: whether the area and cooling claims are workable in the destination market, which jar and closure combination is available at the target volume, what the decoration route means for print minimums, and which tests the claims will require. Once those are agreed, a costing sheet and a lead time can be issued against the frozen specification. Buyers who already hold a reference jar, a label proof or a competitor sample can send them with the brief and shorten this step.

Buyer FAQ

Is the cooling effect a formula effect or only label copy?

Either is possible, and the choice belongs to the brief. A cooling agent or a eucalyptus-forward blend produces a measurable sensory effect; a fragrance-only route produces an impression that fades faster. The star rating on the sales board is a design element, not a measurement, so an intensity claim on your own label needs a panel test for your formula.

Can we keep a six-hour freshness line on our label?

Only with evidence for that formula and that market. A duration claim is a performance claim, and it normally needs a consumer or sensory study run on the finished product. Without it, the label should describe the scent and the rinse-off step rather than a clock.

Will it work alongside an aluminium-based deodorant?

That is a compatibility question, not a formulation given. Exfoliation, rinse residue and fragrance can all affect how a deodorant sits on skin, and the interaction is tested on the pair rather than assumed. Tell us the deodorant format in the brief if the routine claim matters to your listing.

Can the 150 g jar be replaced by a tube?

Yes, but the change is not cosmetic. A tube holds a different fill range, has a smaller print area and needs a different base viscosity to dispense. It should be decided before artwork, because the label layout does not transfer between the two.

Which fragrance allergens have to be declared?

It depends on the finished formula and the destination market. Mint, eucalyptus and lavender directions commonly carry limonene, linalool and citral, but the list is fixed after the fragrance is locked and the formula is costed. The label is then proofed against that list rather than against the scent name.

What documentation comes with an export order?

Each order carries its own document set: the specification both sides signed, the approved artwork proof, the batch record for that run, and whichever test reports were ordered for the formula. The certificate question is market-specific, so the list is settled with the buyer before the run starts, not assembled afterwards.

Start an underarm scrub brief

Send the market, the jar size, the scent direction and the claims you intend to print, and the first reply will come back as a feasibility note with the component options and the tests your claims will need. Two links cover the rest: request a quote for a costing sheet, and contact the team if the brief is still a paragraph rather than a specification.

Where to read next

Get OEM/ODM insights and claim-safe wording guides.

No spam. Unsubscribe anytime. One email every 3-4 days max.