Private Label Bikini & Underarm Body Scrub – OEM/ODM Exfoliating Scrub Manufacturer

Direct answer: this reference is a 220 g / 7.76 oz body scrub in a clear jar with a white screw lid, printed Body Scrub — Bikini & Armpits and marked BHA + AHA + Vitamin C, with a blank “Your Logo” panel for private label artwork. The pink cream base carries visible exfoliating particles. The jar is filled, labelled and packed as an OEM/ODM project by Guangzhou Guocui Biological Technology Co., Ltd. in Guangzhou. Four icons on the wrap — exfoliates, smooths, brightens, suitable for sensitive skin — and the coconut, walnut, lemon and shea-butter styling are packaging copy and decoration, not test results. The product folder holds packshots only: no formula sheet, no acid assay, no patch test, no certificate. This page therefore publishes no percentage, no pH value and no measured effect.

Next step: request a private label quote for this scrub, or send the market, jar size and label direction to the Guocui team.

Product positioning

Most body scrubs are sold on size, scent or polish feel, and the category has become a commodity shelf: 200 g, 300 g, five fragrances, one price band. This jar takes a different route. It names two places instead of a whole body — the bikini line and the underarm — and that single choice reorganises the whole commercial story.

Area naming works because it answers a question the shopper is already asking. A generic body scrub leaves the customer to decide whether the product is safe near a hairline, a shaved surface or skin that reacts to fragrance. A jar that says “bikini & armpits” removes that decision from the shelf and hands it to the formulator. The buyer is no longer comparing grittiness across ten jars; they are buying permission to use an exfoliant where they were previously cautious.

The 220 g fill sits in the useful middle of the format range. A 100 g jar reads as a sampler and rarely survives a second purchase; a 500 g salon tub is a commitment that most home users never finish before the period-after-opening date. At 220 g the unit is small enough to be an add-on to a razor, a waxing appointment or a deodorant routine, and large enough to justify a shelf-facing position. For a subscription or gift box, that is exactly the size that keeps postage bands flat.

There is also a merchandising angle worth stating plainly: two-area positioning lets one SKU serve two departments. In a pharmacy it belongs next to shaving; in a beauty retailer it belongs in body care; online it can be listed under both without a second formula. The economics of one jar, one label, two search intents is the reason this format keeps coming back in briefs from distributors.

Suitable buyers

This direction fits buyers who already sell into body care and want a second, more specific unit rather than another scent variant:

• Independent body-care brands building a short range around one routine — shave, exfoliate, moisturise — where the scrub has to earn its place with a named use.
• Waxing, sugaring and laser studios retailing a take-home step after treatment, where the jar can carry studio branding and a staff instruction on the label.
• Subscription and gift-box operators who need a 220 g body unit that fits a fixed carton and a fixed postage tier.
• Distributors in markets with active brightening and even-tone demand, where an acid-and-vitamin story sells, subject to the wording limits of that country.
• Marketplace sellers testing a two-area listing against a generic scrub to see which intent converts before committing to a full range.

It is a weaker fit for buyers who need a clinical or post-procedure product, an exfoliant for compromised skin, or a formula with published acid percentages on the front panel. Those briefs need a different evidence set and a different regulatory route.

SEO and buyer keywords

The phrases this page is built to answer are procurement phrases, not consumer phrases. Buyers arrive with a container and a claim in mind, so the useful terms are the ones that pair a format with a project: private label bikini scrub, underarm scrub OEM, body scrub manufacturer with custom jar, 220 g body scrub wholesale, BHA AHA body scrub private label, exfoliating scrub OEM Guangzhou, intimate area scrub formulation, scrub supplier for waxing studio retail.

Two of those deserve a note. “Bikini scrub” carries a safety question behind it, and a page that answers that question with process — particle choice, pH target, patch-test route — is more useful to a buyer than a page that repeats the keyword. “BHA AHA scrub” carries a regulatory question, because acid labelling rules differ by market; answering it honestly, rather than promising a percentage, is what makes the page quotable by a procurement team.

Custom formula directions

The visible texture in the packshots is a cream base loaded with particles, so the first decision in any project is how that grit is built. Physical exfoliation can use sugar, salt, walnut shell powder, jojoba esters or silica; each behaves differently in a jar over twelve months, and each behaves differently on wet skin in a small area. The supplier artwork decorates the jar with coconut, walnut, lemon and shea butter, but decoration is not a formula: no ingredient list is published for this reference, and the imagery should not be read as an INCI claim.

The acid line on the wrap (“BHA + AHA + Vitamin C”) is a positioning decision that the buyer makes with the formulator. Two practical points govern it. First, AHA and BHA performance depends on free-acid level, which depends on pH and on the neutralising route, so the percentage and the pH have to be fixed together and confirmed in the project specification — neither is asserted on this page. Second, vitamin C is a family rather than a single ingredient; the derivative chosen changes colour stability, fragrance compatibility and cost, and it changes what the label is allowed to say in the destination market.

For an area-specific scrub, three further choices shape the sample. Particle size sets the sensory message: finer grit reads as gentle care, coarser grit reads as workshop-grade polish, and the same base can carry either. The surfactant and emollient balance decides whether the product rinses clean or leaves a film — a film is pleasant on legs and unwelcome in a fold of skin. Fragrance load matters more here than in a leg scrub, because the area is named on the label and the customer will read the ingredient panel with that in mind.

The “suitable for sensitive skin” icon is the one claim on this wrap that should never travel from artwork to website copy without evidence. Whether it can appear on a printed jar depends on the market and normally on human repeat insult patch testing or a defined consumer study, commissioned for that formula. Until such a study exists for a project, the honest label position is a descriptive one: gentle-particle exfoliation, rinse-off use, no added colour beyond the artwork direction — not a sensitivity claim.

Packaging options

The reference uses a clear jar and a white screw lid, with a wrap label that leaves a blank panel for the brand mark. Around that core, the usual project choices are:

• Jar material and finish: PET for clarity and cost, PCR-PET where a recycled-content statement is wanted, PP where a softer touch or a wider shoulder is preferred.
• Closure: plain white screw lid, domed lid, or a lid with a printed top disc; a sealing disc or induction seal where leakage risk in transit is the concern.
• Decoration: full-wrap printed label, partial label with a visible product window, or direct print on the jar when the artwork survives abrasion from scrub particles.
• Fill and tooling: the 220 g fill in the reference jar, or a smaller and larger jar in the same family; a spatula or scoop can be added inside the carton.
• Outer pack: printed carton, shrink band, or a label-only route for e-commerce where the jar ships in a mailer.

Component choice drives the tooling and print minimums, so the packaging route should be fixed before the artwork is finalised rather than after. The custom packaging overview sets out jar, label and carton options in the order they are usually decided.

Sample and QC workflow

A project on this format normally moves through six steps. The brief fixes the market, the area claim, the jar and the fill. A formula direction is then proposed against that brief, with the exfoliation system and the acid route named before any sample is made. The lab sample follows, and the buyer evaluates texture, rinse behaviour and scent on the intended area. Only after the sample is approved does the specification get written — and the specification is where percentage, pH, viscosity and particle size are recorded, per project.

Before a production run, the usual tests are ordered for that formula: stability under accelerated and ambient conditions, compatibility with the chosen jar and liner, microbiological testing, and mass-and-volume checks on the fill. Where a sensitivity or brightening claim is intended, the corresponding patch test or consumer study is commissioned separately, because it is a claim decision rather than a routine line check. Artwork then goes to proof against the approved specification, the pilot run confirms fill weight and label placement, and the production batch is checked against the same document. Guangzhou Guocui Biological Technology Co., Ltd. runs these steps per project; no certificate number, test result or audit grade is published on this page, because none is held for this reference.

MOQ and quotation

No MOQ, price or lead time is published here, and that is deliberate: on a jar product the minimum is set by the least flexible component, not by the scrub. A stock jar with a paper label, a printed lid disc and a shrink band all carry different thresholds, and a custom-coloured PCR jar changes the number again. Quotation therefore follows the component list.

A first reply is a feasibility note: whether the area claim is workable in the destination market, which jar and closure combination is available, what the artwork route implies for print minimums, and which tests the claim will require. Once those are agreed, a costing sheet and a lead time can be quoted against a fixed specification. Buyers who already hold a reference jar or a label proof can send them with the brief and shorten this step.

Buyer FAQ

Is this scrub only for the bikini line and underarms?

The area naming is a positioning choice, not a restriction in the formula. The same base can be sold as a general body scrub with a different label, or narrowed to one area. What changes with the claim is the wording allowed on the jar and the sensory target — finer particles and a lower fragrance load suit smaller areas, coarser grit and a richer film suit legs and arms.

Does the jar contain the percentages printed on the wrap?

The wrap shows an acid-and-vitamin line and no numbers, and this page does not add any. Percentage and pH are set per project with the buyer and recorded in that project’s specification. The packshots in the folder carry no formula sheet, so no concentration is claimed for this reference.

Can the “suitable for sensitive skin” icon stay on our label?

Only if the claim is supported for that formula and allowed in the destination market. In most jurisdictions a sensitivity statement is a claim that needs patch-test or consumer-study evidence, and the test is commissioned for the specific formula and the specific panel. Until that evidence exists, the icon is a design element that should be removed or replaced with descriptive wording.

What exfoliating particle is used?

Not stated for this reference. Sugar, salt, walnut shell powder, jojoba esters and silica are all workable in a cream scrub and each has a different behaviour in the jar and on skin. The choice is made in the formula direction and recorded in the specification; the coconut, walnut and lemon in the packshots are decoration.

Can the jar size or the closure be changed?

Yes, within the component family that is tooled for this format. Moving to a different jar diameter or a domed lid changes the label area and the print minimum, so it is better decided before artwork. A sealing disc or induction seal can be added where transit leakage is the main concern.

What documentation comes with an export order?

Per project: the approved specification, the artwork proof, the batch record for the run, and the test reports ordered for that formula. Which certificates are relevant depends on the destination market and on the buyer’s own compliance route. No document is asserted on this page for this reference, because the folder contains packaging imagery only.

Where to read next

If the question is which exfoliation system to choose for a small-area product, the mint green tea underarm scrub brief covers a deodorant-adjacent positioning on the same area, and the 10% AHA body scrub page shows how an acid-led scrub is specified for larger surfaces. For texture and rinse behaviour across formats, the cream polish and gel scrub RFQ checklist lists the questions to settle before sampling. On wording, the skincare claims compliance guide covers the difference between a descriptive texture statement and a claim that needs evidence.

Start a bikini scrub brief

Send the destination market, the area claim you intend to print, the jar and closure direction, the fill weight and your launch window. The first reply is a feasibility note, because the jar and the claim decide more about the project than the scrub base does. The product range shows the other body formats filled on the same lines, the private label programme explains how a brief becomes an approved sample, and the OEM/ODM capability page covers the development route. To open a project with Guangzhou Guocui Biological Technology Co., Ltd., use the contact form and attach the artwork or the reference jar you already hold.