Private Label Mint & Green Tea Underarm Scrub – OEM/ODM Manufacturer

Direct answer: GUOCUI supplies a mint & green tea underarm scrub as a private-label underarm-care item for deodorant and body-care brands, personal-care importers and men’s grooming lines that want a wash-off physical exfoliant positioned in front of a deodorant rather than a full-body scrub. The reference folder 薄荷绿茶腋下磨砂膏 contains real product photographs of a 150 g / 5.29 oz aluminium screw-cap jar holding a pale-green cream with visible fine exfoliating particles, a blank LOGO block above the printed name MINT & GREEN TEA UNDERARM SCRUB, the sub-line FRESH MINT & GREEN TEA, a small line reading 8-hour lasting fragrance, oil control + odour defense, cool soothing + gentle physical exfoliation, and the fill statement NET WT: 150 g / 5.29 oz. The photographs also show a textured swatch and an application shot on the underarm. The featured image on this page is an untouched photograph from that folder; nothing here is an AI-generated visual. The folder states no ingredient list, no concentration, no pH, no fragrance-allergen declaration, no preservative system and no test data, so none of those is asserted on this page.

Product positioning

The underarm is the one body area where a scrub is bought for a reason other than smoothness. Buyers come to it because shaving and deodorant use leave the area feeling coated, because a cream deodorant can sit unevenly on flaky skin, or because they want the fresh-clean sensation that a body wash does not leave behind. That is a different shopping trigger from a full-body polish, and it is normally answered by a small-format, fine-particle product used two or three times a week rather than a coarse salt scrub used on the legs.

Read from the artwork: the jar is drawn in a brushed-metal aluminium finish with a ribbed screw cap, the fill is a pale-green cream carrying visible particles, the name panel is set over a blank logo block, and the styling places mint leaves, green tea and a halved avocado around the unit. The claim line is deliberately short, and the only figure printed on the pack is the net weight.

What decides whether an underarm scrub project reaches production is not the fragrance story but the particle profile. Fine enough to be tolerable on a hair-bearing, frequently shaved area, dense enough to feel like it is doing something, and stable enough not to settle out of a cream that will sit in a 150 g jar for two years. Those decisions sit with the exfoliant choice and the suspending system, and they are settled at sampling.

Why the underarm step is treated as its own SKU

A body scrub is merchandised as a weekly ritual in a large tub; an underarm scrub is merchandised as a companion unit beside the deodorant the buyer already repurchases. That difference in shelf position changes the brief. The format has to be small enough to sit next to a 50 ml roll-on, clean enough to be used in a shower without grit running down the arm, and gentle enough that a buyer who shaved the day before is not put off by it. It also means the product is normally judged on repeat use rather than on gift appeal, so a range extension into this position is usually planned as a permanent line item rather than a seasonal novelty.

A second consequence follows from the first. Because the unit is small and used frequently, the fit of the closure matters more than the volume. A 150 g jar is opened and closed in a wet shower many times over its life, so cap thread engagement, gasket behaviour and label adhesion on a curved metal surface are all part of what the buyer experiences. Those points are agreed with the tooling and the decoration route, not with the formula alone.

What a 150 g aluminium jar changes

Plastic is easier to decorate and cheaper to ship, but an aluminium jar reads as a durable, refillable-looking unit and it takes a direct print without a label. That matters here because the underarm position is close to categories — deodorant, men’s grooming, refillable personal care — where metal-format packaging is already understood by the shopper. The trade-off is that a metal surface is less forgiving: print registration on a brushed finish is judged at arm’s length, and a label that lifts at the edge in a humid bathroom is visible immediately. Artwork decisions are therefore taken on a decorated sample of the actual jar rather than on a paper proof.

The odour wording, and where the compliance line sits

The reference panel carries a short line reading 8-hour lasting fragrance, oil control + odour defense. That wording is supplier artwork, not a reported test result, and it must be treated as a claim to be qualified rather than a specification. Duration wording such as “8-hour”, odour-control wording and any anti-perspirant direction each carry a different regulatory consequence depending on the destination market, so the final panel is drafted with the market in view and only after the supporting evidence exists. The same applies to any whitening or brightening direction for the underarm: where a market restricts that wording, the panel is written without it.

Suitable buyers

• Deodorant and antiperspirant brands adding a wash-off underarm step to an existing range
• Body-care and bath brands building a short underarm set rather than a full-body scrub line
• Men’s grooming lines that want a small-format exfoliant next to the deodorant SKU
• Personal-care importers and distributors in hot, humid markets where fresh-feel products sell year-round
• DTC and marketplace brands testing a compact, low-commitment body-care addition
• Salon, spa and aesthetic-channel suppliers building an underarm-care protocol item
• Buyers sourcing a private-label underarm scrub from an OEM/ODM partner in China

SEO and buyer keywords

underarm scrub OEM, private label underarm scrub, mint green tea underarm scrub, underarm exfoliating scrub manufacturer, custom body scrub private label, 150g scrub jar OEM, deodorant companion scrub supplier, underarm scrub ODM China, private label body exfoliant manufacturer, aluminium jar scrub private label.

Custom formula directions

Everything below is a direction to brief, not a specification the reference folder already carries.

• Exfoliant system: the artwork shows fine discrete particles in a cream base. Particle type, particle size and load are the first decision, and they are chosen together with the suspending system so the particles do not migrate in a jar that is stored on its side. Physical exfoliants and any acid-based alternative are briefed as separate routes, because they carry different labelling and consumer-warning consequences.
• Base and after-feel: a cream that rinses clean without leaving a film, or a richer base that leaves a soft finish. The styling in the photographs places avocado beside the jar, which points at a plant-butter direction, but the folder states no base composition, so the actual oil and butter system is set at sampling.
• Fresh-feel direction: the pack leads with mint and green tea, and the artwork pairs that with “cool soothing”. A cooling direction can be briefed, and the cooling ingredient and its level are chosen against the destination market’s rules, since some cooling agents carry use limits.
• Fragrance: fragrance level, character and the allergen declaration are agreed per market. The reference panel prints a duration wording; where that wording is used, it is supported by the buyer’s own substantiation rather than copied from the reference.
• Colour: the photographs show a pale-green cream. Whether the shade comes from the botanical materials or from colourant is a sampling decision, and colourant choice is made against the destination market’s permitted list.
• Preservative and microbiology: a wash-off product used in a wet environment with fingers in the jar needs its preservative system and its microbiological and preservative-efficacy checks agreed with the buyer’s quality team.

Claims that cannot be printed before they are tested

The artwork carries three claim directions — a duration figure, an oil-control wording and an odour-defence wording. Each of them is a claim, and each needs the destination market’s view taken before it goes on a panel. Odour-control and anti-perspirant wording in particular sits on a different regulatory footing from a plain cosmetic exfoliant in several major markets, so a project that leads with odour wording is written up by the buyer’s regulatory contact and supported with the evidence their market requires. No duration figure, percentage or instrumental result is repeated on this page as a product outcome, because the reference folder contains none.

Packaging options

• 150 g aluminium screw-cap jar as shown, with a brushed or coloured finish and a ribbed or smooth cap
• Direct print on the jar body, or a wrap label where a longer ingredient and warning panel is needed
• Blank logo block for the buyer’s own mark, as drawn, or a moulded or printed brand treatment
• Secondary carton, belly band, sleeve or shrink band carrying the full statutory panel
• Starter and travel sizes alongside the reference 150 g fill, subject to the same jar tooling
• Two-unit or three-unit underarm sets packaging the scrub beside a deodorant or body wash
• Multilingual panels for the destination market

Decoration should be proven on the actual jar. Direct print on a brushed metal surface, label adhesion in a humid bathroom and print registration around a cylinder each behave differently from a flat paper proof, so a decorated pre-production sample is the reference for approval. Where a set is planned, the set packaging is proven alongside the unit, because a shared outer carton decides how the units are filled, weighed and shipped.

Sample and QC workflow

1. Confirm the destination market, the sales channel and whether the scrub is sold alone, as a set, or beside a deodorant in the same range.
2. Fix the exfoliant route, the base, the fragrance direction and the claim wording the market allows.
3. Decorate a pre-production sample so jar finish, print registration and logo placement can be judged at retail distance.
4. Review the sample in use: particle feel and density, spreadability, rinse behaviour and after-feel on the underarm.
5. Check fill weight per unit against the retained standard on the same filling line that will be used for the order.
6. Run stability and compatibility checks on the filled jar as the brief requires, watching for particle settling, syneresis, cap corrosion, print or label lift and colour drift, including at the storage temperature the market implies.
7. Complete microbiological and preservative-efficacy checks where the formula calls for them.
8. Run transport and drop resistance checks in the intended retail pack, because a filled metal jar is heavier than the same volume in plastic.
9. Complete finished-product claim testing where a duration, oil-control or odour wording is requested.
10. Approve the pre-production sample, then hold in-process and pre-shipment checks on unit count, print, fill weight, batch code and carton count.

MOQ and quotation

MOQ is issued inside the written specification rather than published, because it depends on the route chosen. Reusing an existing jar and an existing base is a different starting quantity from opening a new tool or a new fragrance, and the exfoliant load, the decoration method, the secondary pack and the testing scope each move the number. A buyer testing a channel can usually start lower when the jar form, the closure and the base already exist.

To quote accurately, send the destination market, the sales channel, the estimated quantity, the target cost, the jar finish and cap style, the logo method, the secondary pack, the exfoliant direction, the fragrance direction, whether an odour or duration wording is required, artwork status, whether a sample must be approved first, the testing you expect and the launch date. With that brief GUOCUI can put a base forward, price the project and open a sample slot.

Buyer FAQ

Is an underarm scrub a cosmetic or a deodorant?

In most markets a wash-off exfoliating scrub is a cosmetic, but a panel that promises odour control or anti-perspirant performance can move the product into a different classification — in some markets an anti-perspirant is regulated as an over-the-counter drug rather than a cosmetic. That classification is decided per destination market, so the claim wording is agreed with the buyer’s regulatory contact before the artwork is finalised.

Can the “8-hour lasting fragrance” wording be used on our own label?

Only with the buyer’s own substantiation and with the destination market’s rules applied. The wording appears on the supplier artwork; it is not a reported result and it is not reproduced here as a product outcome. Where a duration claim is required, the supporting study and the market review are the buyer’s to commission and hold.

Can the exfoliating particles and their density be changed?

Yes, within the base and the jar that the project uses. Particle type, particle size and load are briefed at sampling, and they are chosen together with the suspending system so the particles stay evenly dispersed in a jar stored on its side. Coarser particles can be trialled, but tolerance on a frequently shaved underarm is a sampling judgement.

Can we use a plastic jar instead of the aluminium one shown?

Yes. The reference format is a 150 g aluminium screw-cap jar, and a plastic jar in a comparable volume is a normal alternative where weight, cost or recycling wording matters more than the metal finish. The closure, the print route and the transport testing are re-confirmed for whichever jar is chosen.

Does the product contain alcohol or animal-derived material?

The folder states no ingredient list, so no claim about alcohol content, animal-derived material or Halal status can be made from it. The base is built to the buyer’s brief, and where a market or a certification requires an alcohol-free direction or documented sourcing, that is specified at sampling and evidenced by the supplier rather than assumed.

What information is needed to start an OEM/ODM project?

Send the destination market, sales channel, estimated quantity, target cost, jar finish and cap style, logo method, secondary pack, exfoliant and fragrance directions, whether an odour or duration wording is required, artwork status, whether a sample must come first, the testing you expect and your launch date.

Related body-care and deodorant reading

Two nearby pages cover the adjacent decisions. The 10% AHA body scrub page takes the acid route to body exfoliation rather than the physical route used here, which is the right starting point when a buyer is choosing between a chemical and a mechanical exfoliant for the same range slot. For the claim side, the claim-safe deodorant RFQ guide sets out how odour and duration wording is held in a body-care project before it reaches a panel. The body-care private label formats page places the scrub format in the wider body-care line-up, and the cream body polish and gel scrub RFQ checklist lists what a buyer is normally asked for at the quotation stage.

Start your OEM/ODM underarm scrub project

The manufacturer behind GUOCUI is Guangzhou Guocui Biological Technology Co., Ltd. Send your brief through the contact form to open a private-label mint & green tea underarm scrub project, and the team replies with a specification, a sample slot and pricing. The wider private-label range sits on the products page.