Skip to content
GUOCUI BIO TECH Skincare OEM/ODM

Private Label Tea Tree Body Wash 473 ml | OEM/ODM

Direct answer: the reference unit in the photograph is a 473 ml (16 fl oz) opaque dark-green pump bottle of tea tree body wash with a white pump, a round wrap label and a YOUR LOGO placeholder. The pack copy reads Tea Tree Body Wash, natural care for healthy skin, refresh · cleanse · revitalize, with botanical extracts tea tree oil & aloe vera and sulfate & paraben free. It is a private label rinse-off cleanser project: surfactant blend, fragrance, preservative system, bottle, pump, label artwork and export carton are each fixed per order, not taken from the picture.

Next step: send the destination market, the pack size you need, whether the surfactant system must be sulfate-free and the claim wording you hope to print, or open a body wash quote with your artwork file attached.

The packshot is pack copy, not a specification. It names two botanicals and two free-from statements, and it stops there: no tea tree oil percentage, no aloe vera percentage, no surfactant list, no pH, no viscosity, no fragrance allergen declaration, no preservative system, no microbiology result, no market filing. The folder behind the image holds packshots only. This page therefore asserts no concentration, no test outcome and no certification, and treats purifying, soothes & hydrates and gentle for all skin types as wording that must be substantiated market by market rather than as demonstrated effects. Guangzhou Guocui Biological Technology Co., Ltd. formulates, fills, labels and export-packs rinse-off and leave-on cosmetics in Guangzhou; every number below the label belongs to a project brief.

Private label tea tree body wash reference unit, 473 ml opaque dark green pump bottle with white pump, round label showing tea tree oil and aloe vera call-out and a your-logo placeholder, GUOCUI OEM/ODM rinse-off cleanser project
The reference unit: 473 ml opaque green pump bottle, white pump, wrap label. Botanical line art sits under the two-botanical call-out, and the three icons repeat label wording rather than measured performance. The circular panel at the top is a logo placeholder.

Product positioning

A body wash is not a serum with a different cap. It is a rinse-off product sold at a few dollars a unit, where the formula cost is measured per litre, the shelf impression is carried by the bottle, and the buyer’s real risk sits in three places: whether the surfactant system still foams in the buyer’s water, whether the viscosity pumps cleanly on the last fifth of the bottle, and whether the label survives a wet bathroom for the life of the pack. Those three constraints decide more private label body wash projects than the botanical story does.

The tea tree cue also splits search intent in a way that matters commercially. One half of the demand is body-acne and blemish treatment language, which in most markets is a medicated or biocidal pathway rather than a cosmetic one. The other half is a natural-positioning body cleanser bought on scent, lather and pack. This page is built for the second half and states plainly where the boundary sits, because a supplier who promises the first half in a cosmetic dossier creates a claim problem the brand inherits at customs or at the first retail audit.

Positioning that survives that split: a family-size pump bottle aimed at daily shower use, sold on a clean surfactant architecture and a recognisable botanical scent, with the pack doing the work of shelf recognition. That is why the reference unit is a 473 ml opaque pump rather than a tube or a small bottle — opaque walls let a formulator use a preservation and fragrance system that would be compromised in clear PET, and the pump lets the product be dosed one-handed, which is what a shower format is judged on.

Suitable buyers

Retail private label brands adding a body line under an existing face or hair range. The pump bottle reads as family size, so it can anchor a body shelf next to a scrub and a lotion without a new brand story.

Hotel, spa, gym and short-stay operators that need an amenity or a refill format. These buyers care about dilution control, pump durability across hundreds of cycles and a label that resists alcohol-based surface cleaning, not about ingredient storytelling.

Distributors and wholesalers in markets where tea tree is already an established shelf cue — Australia and New Zealand, the UK natural channel, North America, and parts of South-East Asia — and who need a repeatable specification rather than a one-off batch.

Men’s grooming lines that want one neutral all-over cleanser instead of a multi-SKU range, and set builders pairing a wash with a scrub, a loofah or a hand cream in a gift carton.

This project is not the right route for a brand that needs a body-acne treatment claim, an antibacterial or sanitising claim, or a therapeutic registration. Those sit outside cosmetic scope in most destinations and need a different dossier, different testing and often a different licence holder.

SEO and buyer keywords

The phrases buyers arrive with are specific to the format, not to the botanical: tea tree body wash private label, sulfate free body wash OEM manufacturer, 473 ml pump bottle body wash wholesale, custom shower gel manufacturer China, paraben free body wash private label, hotel amenity body wash supplier, aloe vera tea tree body wash OEM, and private label body care manufacturer low MOQ. Each maps to a different decision: the first two to formula and claim permission, the third to mould and carton planning, the fourth to sourcing and documentation, the last two to programme size.

The page is written to answer those questions in the order a buyer asks them — what the unit is, who it suits, how the formula is fixed, how it is packed, how it is checked, what a quote needs — rather than to repeat the product name. Descriptive terms are used where they are accurate to the pack: pump bottle, 473 ml, rinse-off, sulfate-free direction, paraben-free preservation, tea tree and aloe vera call-out.

Custom formula directions

Surfactant system and the sulfate-free claim

Sulfate-free describes what is absent, not what is present. A sulfate-free body wash usually replaces the alkyl sulfate backbone with a combination of gentler anionic, amphoteric and non-ionic surfactants plus a rheology modifier to rebuild the viscosity the sulfate would have carried. The practical consequences are real: foam volume drops unless the system is rebalanced, the gel can thin at elevated temperature, and cost per kilogram rises. The brief therefore fixes four targets before a lab batch is made — foam height at the buyer’s dilution, viscosity band at fill and after four weeks, pH window, and rinse feel under the buyer’s water hardness. A conventional sulfate system remains available where the claim is not required.

Viscosity, pH and pump dispensing

A 473 ml pump is a dosing device as much as a package. The product has to be thin enough to draw into the pump chamber and thick enough not to run off the hand, and it has to hold that band from the first stroke to the last. Viscosity is specified with the test method and temperature attached, because a number without a method is not a specification. pH is set with the preservative system in mind rather than independently — moving a rinse-off cleanser up or down half a unit can change both preservative efficacy and fragrance stability.

Tea tree oil and aloe vera: label versus formula

The pack names tea tree oil and aloe vera. It does not state a percentage, and this page will not guess one. Percentage, grade and the point of addition are set in the brief, then written into the label declaration in the format the destination market requires — parfum versus a named oil, aloe barbadensis leaf juice versus a powder, and whether the material counts as a fragrance or an active ingredient for labelling. Two formulas can carry identical pack copy and different declarations, which is exactly why the label is proofed against the formula rather than against a reference image.

Preservation in a rinse-off

Paraben-free is a system decision. Removing parabens shifts the burden onto organic acids, phenoxyethanol combinations or other approved actives, each with its own pH optimum, solubility limit and packaging compatibility. Rinse-off products are more tolerant than leave-on ones because contact time is short and the product is diluted immediately, but a body wash is still used in a wet, warm, repeatedly opened pack, so the preservation strategy is validated with a challenge test per project instead of being assumed from the preservative’s datasheet.

Fragrance, colour and the word natural

Tea tree scent is polarising and volatile. The fragrance direction is fixed with an allergen declaration in view, since several terpene components are declarable above set thresholds in the EU and UK and the buyer’s market determines whether a natural descriptor is available at all. Colour is a separate decision: an opaque green bottle can carry a clear or lightly tinted gel without the product colour doing any work, which is one reason the reference format is opaque.

Packaging options

The base unit is a 473 ml opaque pump bottle. Around it, the usual project choices are: bottle material (HDPE, PET or a recycled-content grade where the buyer’s market accepts it), pump versus flip-top versus disc-top closure, wrap label versus shrink sleeve versus direct decoration, and a refill pouch where the buyer’s channel supports it. Carton configuration matters as much as the bottle: shipper count, dividers, barcode placement and whether the outer is shelf-ready all change the tooling and the packing labour, and all of them are quoted rather than published.

Artwork is proofed against the approved formula and the destination market’s mandatory statements. The circular panel in the reference image is a logo placeholder; where the buyer’s logo needs more space, the label layout is rebuilt rather than scaled, because claim text and ingredient declaration have fixed minimum sizes in most markets.

Sample and QC workflow

1. Brief. Market, volume, pack size, surfactant direction, fragrance, claim wording, label language and carton requirement are written down before any lab work, because each one changes the formula or the pack.

2. Bench batch. A small batch fixes the surfactant ratios and the viscosity target. The buyer receives a sample with its own reference code, not a generic stock sample.

3. Stability. Accelerated and real-time conditions are set per project. What is looked at: viscosity drift, pH drift, phase separation under centrifuge, fragrance change, colour drift and pack compatibility including pump parts.

4. Preservation. A challenge test is run against the final formula and pack, not an earlier version, since preservative efficacy depends on pH and on the surfactant system.

5. Pump and pack function. Dosing volume, prime strokes, leak under inversion, and label adhesion after wet handling are checked on the actual bottle and pump combination.

6. Pilot, then production. A pilot run confirms fill weight, viscosity at filling temperature and carton performance; the production batch keeps a retention sample and a batch record. The tests above are scope items — whether a given test is included, and what its result was, is stated per batch in the batch documentation, not on this page.

MOQ and quotation

Neither the minimum order quantity nor the lead time is published here, because both follow the pack rather than the formula: a stock 473 ml mould, a new mould, a shrink sleeve and a shelf-ready carton sit in different bands. A quotation needs six inputs — destination market, total quantity, pack size and closure, label language, the claim wording you intend to print, and whether the surfactant system must be sulfate-free. Send those through the contact form and the reply comes back with a specification sheet and a production window.

Buyer FAQ

Does the packshot state a tea tree oil percentage?

No. It names tea tree oil and aloe vera and prints two free-from statements; there is no percentage, no grade and no ingredient list on the label in this image. Both percentages are set in the brief and declared in the destination market’s required format. No concentration is asserted by this page.

Can the body wash be genuinely sulfate-free?

Yes, as a formulation direction: the alkyl sulfate backbone is replaced with other surfactants plus a rheology modifier. The claim wording itself has market-specific conditions, and the foam and viscosity targets have to be rebuilt rather than carried over from a sulfate formula. Both are confirmed at sample stage.

Is paraben-free difficult in a pump bottle?

It is a system change rather than a substitution. The replacement preservative has its own pH optimum and solubility limit, and opaque HDPE is more forgiving than clear PET because light and headspace exposure are reduced. Efficacy is confirmed by challenge test on the final formula and pack.

Can the label say “gentle for all skin types”?

The wording appears in the reference artwork as pack copy. Whether it may be printed depends on the destination market and on the substantiation the brand holds — some markets restrict absolute wording such as all, and a tolerance claim normally needs patch or human-repeat-insult data on the finished formula. Artwork is proofed, but the claim decision and its support sit with the brand.

Can you print “antibacterial” or “treats body acne”?

Not on a cosmetic dossier. Those are biocidal or medicinal claims in most destinations and require a separate registration pathway, testing and often a different licence holder. A cosmetic body wash can be positioned on cleansing, scent and feel; it cannot borrow a treatment claim through label wording.

What is the minimum order and the lead time?

Quoted per project. Pack size, closure, label type, total quantity and testing scope decide the band, so a single published figure would be wrong for most briefs. The six inputs listed under MOQ and quotation are enough to produce a real number.

Can you match the lather and scent of a body wash we already sell?

A benchmarking sample can be worked from, and the foam, viscosity and scent profile can be targeted. The limit is the formula itself: a patented surfactant combination is not copied, and the match is built from available materials, which is why a bench sample is compared side by side before a brief is locked.

Can you supply EU or UK documentation?

Rinse-off cosmetic documentation is scoped per destination. In the EU and UK the Responsible Person arrangement decides who compiles the safety report and product information file and who files the notification, so the documentation workstream is agreed with that entity rather than promised generically. No certificate or filing is asserted on this page.

Start a tea tree body wash brief

Send the destination market, the pack size, the surfactant direction, the fragrance reference and the claim wording you want to print. If you already have artwork, attach it — the proof comes back marked against the formula and the market’s mandatory statements. Start with the inquiry form, or open a quote request and put the six inputs in one message so the first reply carries a specification rather than a question list.

Where to read next

The full development catalogue sits in the product catalogue, and the body-care formats are grouped under private label body care. For the commercial model behind the project, read OEM versus ODM manufacturing; for label wording limits, the claims compliance guide sets out which statements need support. A rinse-off pairing that often ships with this unit is the underarm scrub reference, and a leave-on companion from the same body programme is the hyaluronic hand serum.



Get OEM/ODM insights and claim-safe wording guides.

No spam. Unsubscribe anytime. One email every 3-4 days max.