Skip to content
GUOCUI BIO TECH Skincare OEM/ODM

Private Label Strawberry Lip Butter 10 g Tin – OEM/ODM Manufacturer

Direct answer: this reference is a 10 g / 0.35 oz silver aluminium screw tin of strawberry-tinted lip butter, supplied with a printed pressure-sensitive label on the lid. The packshot shows the tin open with a soft pink balm inside and the lid resting beside it; the lid artwork carries a your logo placeholder, the words Lip butter, Paraben Free and Strawberry, a 12hr hydration / Moisturization line, and the fill statement 10 g / Net Wt. 0.35 OZ. Every one of those lines is label copy, not a test result: the source folder holds packshots only, with no formula sheet, no stability report, no challenge test and no certificate. This page therefore states no active percentage, no measured hydration value and no certification. Guangzhou Guocui Biological Technology Co., Ltd. compounds, fills, labels and export-packs this tin format in Guangzhou.

Next step: open a private label quote for this lip butter tin, or send the market, fill weight and artwork direction to the Guocui project team.

Private label strawberry lip butter in a 10 g silver aluminium screw tin: open tin with soft pink balm, printed pink lid label with strawberry illustrations, your logo placeholder, Lip butter, Paraben Free, Strawberry and 10 g / Net Wt. 0.35 OZ
The reference unit: a 10 g aluminium screw tin with a printed lid label, a soft pink balm, a logo placeholder, a flavour name, a free-from line, an unsubstantiated moisture line and a dual-unit fill statement.

Product positioning

A screw tin is a different commercial animal from a stick, and the difference is decided before the formula is written. A stick is a one-hand gesture in a narrow tube with a small print area; a 10 g tin is opened with two hands, presents a full circle of artwork on the lid, and asks the buyer to touch the balm with a fingertip or a brush. Brands that sell both formats usually discover that the tin carries gifting, sampling and seasonal flavour rotation far better, while the stick wins on repeat daily use. Knowing which job the unit has to do is the first decision on the brief, not the last.

At 0.35 oz the tin also behaves like a small-format finished good: it stacks into multi-packs and advent-style trays, it fits a pocket or an amenity kit, and it can be reordered in flavour variants without changing the component. That is why a single tin page is rarely one SKU in practice. Buyers tend to come back for a second and third flavour once the tooling and the label artwork already exist.

The pink balm in this image is a visual reference for colour direction, not evidence of pigments, actives or a measured effect. Whether the colour comes from the oil phase, a tinted wax blend or an approved colourant is a formulation question that has to be answered against the destination market’s permitted list.

Suitable buyers

The format suits a specific set of briefs better than others. The list below is about fit, not about who is allowed to enquire.

  • Independent lip care brands adding a pot format to a line that already sells sticks or tubes, where a second texture and a wider artwork area create shelf distinction.
  • Gift and set assemblers building a 3-, 4- or 6-flavour tin tray for seasonal retail, where a consistent 10 g unit keeps the tray geometry stable across flavours.
  • Subscription and sampling programmes that need a small, sealable, non-leaking unit with enough lid area to carry a campaign-specific print.
  • Travel, hospitality and amenity suppliers specifying a compact balm where the fill statement and the ingredient declaration must fit a small label.
  • Distributors in markets where tins are already a familiar lip-care shelf format, who want the unit shape to match category expectations rather than educate the shopper.
  • Brands planning flavour rotation, where the same tin and the same base can carry four label variants with different flavour names and colour cues.

Conversely, this is a poor first project for a buyer who needs an applicator built into the pack, who cannot accept a fingertip application, or whose artwork depends on a large multi-panel story — a tin lid gives one circle, and a wrap label on a tube gives more.

SEO and buyer keywords

The queries that lead to a page like this are not the queries that lead to a consumer product page. They mix format words, component words and sourcing words, and each cluster implies a different buyer state.

  • Format and component intent: strawberry lip butter tin, 10 g aluminium lip balm tin, screw-top lip butter container, 0.35 oz lip balm tin supplier.
  • Private label intent: private label lip butter, lip butter OEM manufacturer, custom lip balm private label, lip care contract manufacturing.
  • Claim and formula intent: paraben free lip butter formula, vegan lip balm base, flavoured lip butter development, tinted lip butter colour matching.
  • Commercial intent: lip butter MOQ, lip balm tin quotation, lip care sample lead time, lip butter export packing.

Keyword coverage belongs in the title, the headings and the answer paragraphs, in the words a buyer would actually type. Repeating a phrase until the paragraph stops reading like a sentence costs more in credibility than it gains in matching. The useful test is whether a sourcing manager could paste a paragraph into an internal note and have it still make sense.

Custom formula directions

Five formulation questions decide whether a tin project survives its first summer and its first retailer audit. None of them can be answered from a photograph.

Wax-to-oil architecture for an open tin

A stick has to be firm enough to hold its shape; a tin balm only has to hold a surface. That relaxes the wax load and allows a softer, more emollient feel, but it also removes the structural crutch that keeps a stick from slumping. The brief should state the texture target in words — firm enough not to slide, soft enough to pick up on a fingertip — and let the lab translate it into a wax, butter and oil ratio. A formula that feels ideal at 20 °C can become glossy at 35 °C, and a tin shows that change on its whole surface rather than at one edge.

Flavour system and allergen disclosure

The word Strawberry on this lid is a flavour descriptor. Whether it is delivered by a flavour blend, a fruit extract or an aroma compound changes the allergen declaration, the stability profile and the cost. Some fragrance and flavour materials carry mandatory labelling obligations in major markets even at low use levels, so the flavour has to be selected with the declaration in mind rather than after artwork is locked. Ask for the flavour documentation before the first sample round, not after the bulk order.

Colour and what the descriptor promises

A pink balm reads as strawberry before the shopper has opened the tin, which is exactly why the colour has to be stable and clearly within the permitted colourant list for the destination market. Tint level also sets expectations: a pale pink surface implies a sheer effect, a saturated pink implies visible colour on the lip. If the artwork says Strawberry but the balm is colourless, the pack and the product are telling two different stories. Decide the tint direction with the marketing team and confirm the colourant route with regulatory review.

Preservation and the free-from line

Paraben Free is printed on this label, and that is a claim with consequences. Anhydrous balms are usually less exposed than water-based emulsions, but a fingertip application introduces a different contamination path than a stick, and any free-from statement has to match what is actually in the formula. The sequence that works is: settle the preservation approach, confirm the ingredient declaration, then set the free-from wording, then send artwork. Reversing that order is how a print run ends up in a warehouse that cannot be used.

Stability, sweating and grain in a tin

Open-tin balms fail in visible ways. Oil can migrate to the surface and leave a sheen; wax can crystallise and leave grain; colour can drift; flavour can fade or turn. Because the whole surface is on display, small defects that would be invisible inside a tube become the first thing a buyer sees. Stability work should therefore include temperature cycling, not only a single elevated-temperature hold, and the retention samples should be opened and inspected at each checkpoint rather than stored sealed.

Packaging options

The tin is the product’s face, and the decoration route decides both the unit cost and the minimum order. The routes below are the ones worth discussing at brief stage; availability and minimums have to be confirmed against the actual component rather than assumed from this photograph.

  • Lid decoration: printed pressure-sensitive label, direct print on the lid, or a combination of base colour plus label. Each route has a different artwork tolerance and a different moq structure.
  • Tin finish and colour: plain aluminium, tinted or coated body, and matte or gloss surface treatment. A tinted body changes how the label edge reads.
  • Label material: paper with a matte or gloss laminate, or a synthetic film for humidity and abrasion resistance. A balm that will travel in a pocket needs the film conversation.
  • Closure and seal: screw lid torque specification, an inner liner where required, and an optional tamper-evident band for retail channels that expect one.
  • Secondary packaging: a printed carton, a paper band, or a tray for multi-flavour sets. Sets usually need the tray designed around the tin diameter, not the other way round.
  • Multi-pack architecture: 3-tin and 6-tin trays, with a single outer sleeve carrying the range story so the individual tins can stay single-flavour.

Artwork and dieline control matter more here than on a tube. A lid label is a circle with a bleed allowance and a safe area, and the logo, the flavour name, the free-from line and the fill statement all compete for the same few centimetres. A printable proof on the real label stock, checked against the real tin, catches more problems than a screen proof ever will.

Sample and QC workflow

The workflow below is the sequence this project type normally follows. Timings and the number of sample rounds are set per project and confirmed in the quotation; they are not fixed by this page.

  1. Brief and feasibility: fill weight, texture target, flavour and colour direction, destination markets, artwork status and target retail channel are captured in writing.
  2. Formula direction: the lab proposes a base architecture, a flavour route and a colourant route, with the documentation each one requires.
  3. Lab batch and first sample: a small batch is made and filled into the intended tin so the sample is evaluated in its real pack, not in a jar.
  4. Sample rounds: texture, surface appearance, flavour intensity and tint are adjusted; each round is documented so the approved version can be reproduced.
  5. Artwork proof and pre-production approval: the label is proofed on the actual stock, the declaration is checked against the approved formula, and a signed pre-production sample becomes the reference for bulk.
  6. Bulk and in-process checks: fill weight, balm surface, tin condition, lid torque, label position and label adhesion are checked during filling and packing.
  7. Release and documentation: the batch documentation set is confirmed per product and per market — ask for the current list for the destination rather than relying on a generic promise.
  8. Retention samples: sealed and opened samples are kept so that a future complaint can be compared against a known-good reference.

Two QC points deserve naming because they are specific to this format. First, tin deformation: a dented lid reads as a damaged product even when the balm is perfect, so carton protection has to be specified for the shipping mode. Second, label adhesion on a curved, thermally conductive surface: a label that behaves in a 20 °C room can lift at the edge after a cold container journey, which is why adhesion should be checked on the real component.

MOQ and quotation

There is no single minimum order quantity for a lip butter tin, and any page that prints one number for every buyer is describing a different project. The quantity is driven by at least four separate minimums that have to be satisfied at the same time: the formula batch minimum for the fill, the tin component minimum, the label print run, and the flavour or colourant minimum where a special material has to be ordered. The highest of those four, not the lowest, sets the real starting point.

A quotation request that gets a useful answer usually contains: the fill weight, the flavour and colour direction, the lid decoration route, the destination market, the target launch quantity and any retailer-specific labelling requirement. If artwork already exists, send the dieline status. If it does not, say so — the artwork timeline is often what decides the launch date, not the production run.

For a first project, the practical route is to quote one flavour, one tin and one label route, then price the variants as a follow-on once the base is approved. Sending four flavours at once multiplies the sample work and postpones the decision that actually matters.

Buyer FAQ

Does the “12hr hydration” line come from a test?

No. The line is printed label copy on this reference unit, and the source folder contains packshots only. A duration claim of that kind needs instrumental or consumer study support in most major markets, together with a defined test protocol and a claim review for the destination country. Treat it as a design element to be replaced with supported wording before launch.

Can the balm genuinely be paraben-free?

Usually yes, but the free-from line is a declaration, not a design choice. The preservation approach has to be settled first, the full ingredient list confirmed, and the wording checked against the market’s rules for free-from statements. The claim should be printed only after the formula that will actually be produced has been signed off.

Can we use our own tin size instead of 10 g?

Other volumes are a component question. A different diameter or height means a different tin, a different lid label and possibly a different label print run, so it changes both minimums and artwork. Send the target fill weight and the shelf or gifting constraint, and the component options can be checked against what is actually available.

Who decides the flavour and the colour?

The buyer sets the direction; the project team translates it into materials that are permitted and stable for the destination market. That includes allergen documentation for the flavour and the permitted colourant list for the tint. Sampling is where the direction becomes a specification.

Can the lid carry our logo and a QR code?

Yes in principle, subject to the print route and the available area. On a 10 g lid the logo, flavour name, free-from line and fill statement already use most of the circle, so a QR code usually forces a layout decision. Bring it into the artwork conversation early rather than adding it at proof stage.

What documents come with a shipment?

The set depends on the product and the market, typically a specification, a batch certificate of analysis and safety data, with additional market-specific files where required. Ask for the current list for your destination instead of assuming a standard pack.

Start a strawberry lip butter brief

Send the fill weight, the flavour and tint direction, the lid decoration route, the destination market and the target quantity. If the artwork already exists, include the dieline status; if it does not, say so and the timeline can be planned around it. The fastest useful reply comes from a brief that names one product and one market, not a list of options.

Request a quotation for this lip butter tin · Contact the Guocui project team · Browse the product range

Where to read next

Get OEM/ODM insights and claim-safe wording guides.

No spam. Unsubscribe anytime. One email every 3-4 days max.