Skip to content
GUOCUI BIO TECH Skincare OEM/ODM

Private Label Pro-Xylane Anti-Aging Face Cream 30 g

Direct answer: this reference is a 30 g / 1.05 fl.oz pro-xylane face cream in a double-wall cosmetic jar — clear outer cap, brushed-metal collar, white inner cup — supplied as a private-label OEM/ODM project with a blank panel reserved for buyer artwork. The packshot carries a sample label reading Pro-Xylane Cream with an “anti-aging · moisturizing · repair” line and a molecular mark; those lines are label design, not a test result. The source folder holds packshots only: no formula sheet, no assay, no challenge test, no certificate. This page therefore publishes no active percentage, no pH value and no measured effect. Guangzhou Guocui Biological Technology Co., Ltd. handles compounding, filling, labelling and export packing for this jar format in Guangzhou.

Next step: open a private label quote for this cream, or send the market, jar size and artwork direction to the Guocui project team.

Private label pro-xylane face cream: 30 g double-wall jar with a clear outer cap, brushed metal collar, white inner cup and a label printed Pro-Xylane Cream with an anti-aging, moisturizing and repair line
The reference unit: a 30 g double-wall jar with a clear screw cap over a brushed-metal collar, a white inner cup, and a wrap label carrying the product name, the three-word care line and a molecular graphic.

Product positioning

A face cream is the most crowded slot on any skincare shelf, so the interesting decision in this reference is not the ingredient name. It is the fill weight. Thirty grams sits below the 50 g default that most brands use for a hero cream, and that single number changes who the product is for, how it is costed and how it travels.

Three positions follow from the 30 g format, and each one is a different brief rather than a different label:

  • Entry unit for a new line. A buyer testing a pro-xylane direction in a market they do not yet read can put a full cream texture on shelf without committing to a 50 g programme. The jar presents as a finished retail unit, not a sachet.
  • Kit and gift component. At 30 g the jar fits a multi-step box next to a serum and an eye cream without dominating the carton. It is the format that makes a three-piece set look balanced.
  • Travel and replenishment size. A double-wall jar with a screw cap survives a wash bag better than a tube with a flip top, which is why the same mould appears in hotel, spa and airline-adjacent programmes.

Why the double-wall jar, not the tube

The packshot shows a jar built in two skins: an outer clear cap and collar, and a separate white cup inside. That construction is what gives a 30 g cream its weight in the hand — the outer wall adds presence without adding product — and it also isolates the formula from the decorated surface. When a buyer wants a metallic collar or a frosted shell, the inner cup stays the same and only the outer component changes. The trade-off is component count: two moulded parts plus a cap, disc and label, which is why the jar programme is priced on the component set rather than on the fill alone.

Suitable buyers

This format is usually requested by buyers who already know their channel and are choosing a component to fit it. The groups below are the ones that most often brief a 30 g cream jar.

  • Brand owners launching a first anti-aging step. They need a retail-ready jar with a blank panel, artwork support and a fill that matches a planned price ladder.
  • Gift-set and kit assemblers. They are buying a component that has to sit in a fixed carton with two or three other units, so outer dimensions and cap height matter more than fill weight.
  • Cross-border ecommerce sellers. They want a small, light unit that ships individually without a secondary box, and a label that can carry a batch code and a PAO symbol.
  • Salon, spa and clinic programmes. They resell under their own name, often in back-bar and retail pairs, and usually ask for a neutral, fragrance-controlled version.
  • Hotels, airlines and corporate gifting. They specify the jar for amenity kits and need consistent carton counts rather than retail cartons.
  • Regional distributors. They hold the registration in their market and need the manufacturer to supply the same specification across repeat orders.

SEO and buyer keywords

The phrases below are the ones buyers actually type when they are sourcing this format. They are listed so a buyer can check that the page answers the question behind each phrase — not so the wording can be repeated through the copy.

  • pro-xylane cream manufacturer / supplier — the buyer is comparing factories that can compound and fill a pro-xylane-direction cream, and wants to know whether the ingredient name can be carried on the label.
  • private label anti-aging face cream — a brand-side search, usually paired with a fill weight once the buyer has a price ladder in mind.
  • 30 g cream jar OEM / 30 g airless jar cream — component-led searches, where the jar construction matters as much as the formula.
  • custom face cream ODM China — buyers who want the factory to develop rather than only fill, and who will ask about formula ownership.
  • double-wall cosmetic jar private label — packaging-first enquiries from kit assemblers and amenity buyers.
  • pro-xylane moisturizer bulk supplier — trade buyers pricing a bulk cream before they choose a component.

Two of those phrases describe a component and four describe a formula route. A page that mixes them without saying which is which reads as keyword filler to a buyer and to an answer engine. The sections below keep the two separate: formula direction first, then the jar.

Custom formula directions

Nothing on this page states what the reference formula contains, because the folder does not contain a formula. What follows is the set of decisions a buyer and the lab settle before a sample is made, written so the questions can be answered in one exchange rather than four.

Emulsion architecture for a 30 g jar

A cream that fills well in a 50 g jar does not automatically fill well at 30 g. Smaller fills amplify two things: fill-weight accuracy and product loss on the jar wall. A thicker oil-in-water cream holds its shape in the cup and gives a clean surface after filling; a soft cream needs a higher fill temperature and a longer set before the cap goes on, or it smears into the thread. If the brief is a gel-cream, the lab normally raises the thickener and checks that the texture still breaks down on the skin — a gel that is pleasant in a swatch can feel tacky when only 30 g is spread over months of use.

Active system direction

Pro-xylane is a trade-name ingredient family, and that has a practical consequence for a private-label project: the name on the label has to match the raw material actually in the formula and the documentation that comes with it. Before artwork is signed off, the brief should settle three points — which pro-xylane grade the buyer wants, whether the supplier documentation allows the name to appear on pack in the destination market, and what supporting actives sit alongside it (a humectant system, peptides, niacinamide, or a simple occlusive base). If a buyer has no fixed grade, the lab proposes a direction and states what it is based on; it does not fill the gap with a percentage that no one has measured.

Preservation, pH and the stability window

A jar is a wide-mouth, finger-access pack, which is a harder preservation case than a sealed pump. The preservative system is chosen for the water activity and pH of the actual formula, and then challenged rather than assumed. The pH window also decides which actives survive the shelf life the buyer wants: some acid routes are not compatible with a cream buffered for comfort, and some peptide systems need a narrower range than a standard cream base allows. These are settled at sample stage, not at bulk stage.

Fragrance, colour and claim boundaries

A cream can be supplied fragranced, lightly fragranced or unfragranced, and the choice changes the allergen declaration on the label. Colour follows the same logic: a white cream is the default, and a tinted base needs a pigment compatibility check so the shade does not drift across batches. On claims, the packshot’s “anti-aging · moisturizing · repair” line is packaging copy. Any wording that implies a measured outcome — wrinkle depth, firmness, barrier recovery — needs a study on the finished formula and a check against the rules of the destination market before it can be printed. The claim-safe route and the market-specific route are set out in the skincare claims compliance guide.

Packaging options

The component set is where most of the cost and most of the lead time sit, so it is worth listing what can change without touching the mould.

  • Outer shell. Clear, frosted or opacified; the frosted shell hides a cream that separates slightly at the surface, the clear shell shows the fill colour.
  • Collar and cap finish. Brushed metal, gloss silver, matte silver or a colour-matched lacquer. Metal-look collars are the most common request because they carry the “premium” read at 30 g.
  • Inner cup. White is standard; a replaceable refill cup can be quoted as a separate line if the buyer wants a reuse story.
  • Decoration. Wrap label (the route in the packshot), silkscreen, hot stamp, or a combination. A label gives the widest artwork area and the fastest change-over between markets; direct printing gives a cleaner look on a curved shell but locks the artwork to a minimum run.
  • Secondary pack. A folding carton, a sleeve or a shrink band. For kits, the carton is usually shared across the set, so the jar’s outer dimensions are fixed first and the box is drawn around it.
  • Label content space. The wrap label has to carry the ingredient list, the net content, the batch code, the PAO symbol and the responsible-person block for the market. A 30 g jar leaves less room than a 50 g, so the label layout is proofed early rather than at artwork stage.

Component sourcing and decoration rules are set out in the custom formula development workflow and the packaging guidance linked from custom packaging.

Sample and QC workflow

The sequence below is the same one used for every cream project, and each step has a document attached to it. Nothing moves to the next step on a verbal approval.

  1. Brief and feasibility check. Fill weight, jar component, texture target, active direction, market and claim set. The lab confirms which parts are ready-formula matches and which need development.
  2. Formula match or development. A base is proposed from existing platforms or built for the brief; the buyer receives the direction, the ingredient list and the known constraints before a sample is made.
  3. Lab sample. A small batch in the final jar, not a generic pot, so the texture is judged in the pack it will ship in.
  4. Compatibility and stability. Jar-and-formula compatibility, accelerated stability and, where the market requires it, preservative challenge. Results are reported, not summarised as “passed”.
  5. Golden sample approval. Colour, odour, texture, fill weight and decoration are signed against a retained reference. The signed sample is the standard for the run; the checklist used for this is the golden sample approval checklist.
  6. Bulk manufacture and filling. Batch record, fill-weight checks across the run, cap torque check and a first-article inspection on the decorated jar.
  7. Finished-goods inspection and export packing. Carton count, drop test on the export carton, label read-through against the approved artwork, and the document set for the shipment.

The handover between approval and production is described in the pre-production sample approval handoff checklist.

MOQ and quotation

MOQ for this jar is not a single number, because it is set by two independent minimums: the smallest batch the formula can be compounded in, and the smallest run the chosen decoration allows. A wrap label has the lowest component minimum; direct printing or hot stamp on the outer shell raises it. Quoting before both are known produces a price that has to be revised, which is why the brief comes first.

To quote accurately, the project team needs five items:

  1. Target fill weight and jar decoration route (label, print or stamp).
  2. Texture target and active direction, including whether a pro-xylane grade is already fixed.
  3. Destination market, because the label, the responsible-person block and the test set follow from it.
  4. Claim set, so the wording can be screened before artwork.
  5. Packaging structure — single jar, kit, or carton — and the annual or first-order volume.

The quotation then separates formula work, components, filling, decoration, testing and packing, so a buyer can see which line moves when a specification changes. Lead time is confirmed against the component and the lab queue at the point of order, not in advance of it.

Buyer FAQ

Can we print “Pro-Xylane” on our own label?

That depends on the raw material actually used and the documentation supplied with it. The name has to match the ingredient in the formula and be permitted as pack copy in the destination market. The brief settles the grade first; the artwork follows.

Is the molecular graphic on the jar a claim?

No. It is label design, in the same family as an icon or a texture photograph. A structure drawing does not evidence an effect, and this page does not treat it as one.

What cream textures work in a 30 g double-wall jar?

Medium to rich oil-in-water creams fill most cleanly. Soft creams need a longer set before capping, and gel-creams need a thickener check because the small fill makes tackiness more noticeable over the life of the pack.

Can the jar be supplied as a refill system?

A replaceable inner cup can be quoted as a separate component line. It changes the component count and the carton, so it is a brief-level decision rather than a decoration option.

Which markets need a CPSR and a product information file?

EU and UK routes do. The dossier is built from the formula, the safety assessment and the label, and it belongs to the responsible person in that market. The documents involved are listed in the CPSR, PIF and CPNP guide.

Can you match a formula we already sell?

Yes, if the buyer can supply the specification and confirm the right to use it. Without that, the lab works from the brief and builds a direction, and the resulting formula is a new one rather than a copy.

Does the packshot show the actual formula?

No. It shows a component and a label direction. Any buyer who needs the texture to match a reference should ask for a sample in the final jar before approving artwork.

Start a pro-xylane cream brief

The fastest route is to send the five quotation items above in one message. The team replies with a component proposal, a formula direction and the open questions that remain, rather than a price against an incomplete specification.

Request a private label quote · contact the Guocui team · browse the product references · private label programmes

Where to read next

Get OEM/ODM insights and claim-safe wording guides.

No spam. Unsubscribe anytime. One email every 3-4 days max.