Private Label Ginseng Collagen Glass Skin Mask (25 g Sachet) – OEM/ODM Manufacturer

Direct answer: this reference is a single-serve sheet mask sachet — one 25 g / 0.88 oz. printed pouch holding one pink gel sheet, sold as one unit instead of a boxed multi-pack. The pouch carries a blank YOUR LOGO panel, the descriptor GINSENG COLLAGEN MASK, the mock line GOLW SKIN above it, the strapline Deep hydration + elasticity care, and an ingredient line at the foot reading infused with peptides · niacinamide · ceramides. Three ringed icons sit at the left edge — intense hydration, firm + smooth, radiant glow. Those icons and the ingredient line are packaging copy, not test results: the product folder holds packshots only, with no formula sheet, no declared ginseng or collagen level, no stability file, no test report and no certificate, so none of those is asserted here. Guangzhou Guocui Biological Technology Co., Ltd. runs the format as a private label OEM/ODM project, and the sheet material, essence load, film structure, fill weight and artwork are all set from the buyer’s brief rather than from a fixed catalogue item.

Next step: send the sachet size, sheet direction and destination market to the Guocui team, or browse the rest of the private label product range before you brief.

Product positioning

The unit is a one-mask retail sachet, and that is the whole strategic point. A pouch sells at a trial price, ships in a padded mailer, fits a hotel amenity tray, a subscription envelope or an airline kit, and lets a brand test a ginseng story before committing to a printed carton. The same factory slot can later carry a five-mask carton or a gift assortment, but those are different projects with different print plates and different unit economics — see the five-mask hydrogel carton reference and the fourteen-piece collagen assortment for those routes.

Glass skin in the folder name is a finish descriptor, not a measured optical result: it is the wet, light-reflecting look a gel sheet leaves while the essence is still on the skin. Whether that phrase may be printed depends on the destination market and on the rest of the label — in the EU it reads as a cosmetic appearance claim that has to be supported by the product’s actual performance, in the US it invites scrutiny if it implies a structural change, and in several Asian markets it is accepted consumer language. The supplier prints what the brand’s regulatory adviser approves. This page quotes no instrumental gloss reading, no corneometer value and no before-and-after study, because the folder contains none.

Ginseng and collagen do the story work on the front panel; the physical product is a gel sheet plus an essence load inside a sealed pouch. That distinction matters when a buyer compares quotes: two suppliers can print the same three words and deliver completely different sheet thicknesses, essence weights and seal integrity.

Suitable buyers

• Brands launching a first hero SKU. A single sachet keeps the first order small in print and in film, and it can be photographed for a product page without a carton shoot.
• Travel, hotel and airline amenity buyers. A 25 g pouch is light, leak-resistant when the seal is right, and easy to co-brand with a property logo on the blank panel.
• Subscription and sampling operators. One mask per envelope, no secondary packaging, and a back panel that can carry a batch code and a short ingredient list in two languages.
• Distributors adding a low-price entry point. A pouch sits below a boxed five-pack on the shelf and pulls trial buyers into the range.
• Brands already selling a boxed mask that want a single-unit version without re-approving a carton dieline.

Buyers who need a rigid outer, a folded insert or a shrink-wrapped duo should treat this as a carton project from the start; the pouch reference here is deliberately minimal.

SEO and buyer keywords

The queries this format actually answers are procurement-shaped rather than consumer-shaped, and they cluster into four groups:

• Format queries: single sachet face mask manufacturer, 25 g sheet mask supplier, one-piece mask pouch OEM, individual mask sachet private label.
• Ingredient-story queries: ginseng collagen sheet mask OEM, ginseng mask private label, collagen gel mask manufacturer China, peptide niacinamide ceramide mask supplier.
• Finish and market queries: glass skin mask private label, dew-finish gel mask OEM, K-beauty style mask manufacturer (only where the brand can substantiate the positioning), travel amenity mask supplier.
• Process queries: sheet mask MOQ, sachet seal specification, mask stability testing, private label mask sample process.

Those phrases belong once each, in a heading or a sentence where they carry meaning. Repeating “ginseng collagen mask manufacturer” through every paragraph does not help a buyer and does not help retrieval: the page is written so a procurement manager can lift a sentence into an internal brief and have it still be true.

Custom formula directions

Sheet substrate, thickness and fit

The packshot shows a translucent pink gel sheet with cut-outs for eyes, nose and mouth. A gel or hydrogel sheet behaves differently from a spunlace or cotton nonwoven: it holds essence on the surface, it can slip on a rounded face, and its die-cut has to be tested on real faces before a run. Fit is confirmed on the pre-production sample, not from a drawing. Buyers moving from nonwoven to gel should expect the fit trial to take a round of its own.

Ginseng and collagen as label language

Both words are label story, and both need a decision before pricing: which ginseng preparation the brief names, at what inclusion level in the buyer’s approved formula, and how the ingredient is declared on the back panel in each market. The same applies to collagen, where the INCI name, the molecular form and the marketing name are three different things. This page does not state a level for either, because the folder does not contain a formula.

Supporting actives printed on the pouch

The reference pouch prints peptides, niacinamide and ceramides. Each is a normal cosmetic ingredient with normal restrictions: niacinamide has a declared level to respect in some markets, ceramides are usually supplied as a blend rather than a single substance, and “peptides” covers hundreds of materials. The printed line has to match the approved formula exactly — a pouch that prints an ingredient the formula does not contain is a compliance problem, not a typo.

Claim-safe wording by market

Hydration and elasticity language is workable in most markets when the brand holds supporting evidence. Repair, anti-wrinkle, lifting and “boosts collagen” are not interchangeable with it. Where a brand wants a stronger statement, the route is a test protocol agreed before the run, on the finished product, in the destination market’s accepted method — and that test is a project cost, not something a supplier can print for free.

Packaging options

Sachet film and fill

The pouch is the primary pack, so its structure drives shelf life and cost more than the print does. A foil-containing laminate blocks light and oxygen and suits a longer ambient shelf life; a clear or metallised film shows the sheet and photographs better but asks more of the preservative system and the stability programme. Fill weight on the reference is 25 g; a different fill changes the pouch format, the seal area and the carton that may later hold it. Seal strength, burst resistance and a dye-penetration check belong on the specification, not on a promise.

Print, logo panel and language variants

Gravure print rewards volume with cheaper unit cost and charges for plates; digital print suits a short first run and variable artwork. The blank your logo panel on the reference is generous enough for a wordmark plus a small descriptor. Multi-language back panels are practical on a pouch but they compress the ingredient list, so the copy deck should be fixed before the proof. The mock line GOLW SKIN on this reference is exactly the kind of placeholder a proof round exists to catch — buyer artwork replaces it, and the supplier checks spelling, ingredient names and fill weight against the approved copy deck before plates are made.

Carton, multipack and export packing

A pouch can ship loose in a display tray, in a printed carton, or banded into a multi-pack. Each adds a dieline, a print method and a packing operation. For export, the outer carton needs a fill specification, a batch and expiry mark, and a shipping-mark panel that matches the buyer’s labelling requirements; marketplace sellers usually also want a barcode position and a carton-level photo before the first shipment.

Sample and QC workflow

The sequence below is the one that keeps a single-sachet launch from failing at the seal:

1. Brief and specification sheet. Sachet dimensions, target fill weight, sheet substrate and die-cut, essence direction, actives, fragrance position, artwork files, destination market. Anything left blank becomes an assumption in the quotation.
2. Base sample. The buyer approves texture, slip and after-feel on a lab sample before any sheet is cut.
3. Sheet and fit trial. Die-cut and sheet thickness are tested for coverage and drape; the cut-outs are checked against the target face size.
4. Fill and seal trial. The pouch is filled at the target weight, sealed at the specified temperature and pressure, then checked for seal width, channel leaks and pouch appearance.
5. Compatibility and stability. The finished pouch is stored under the agreed conditions and inspected for film swelling, colour drift, odour change and seal creep. The protocol and its duration belong to the buyer’s market requirements.
6. Artwork proof. Copy deck against printed proof: ingredient names, fill weight, batch and expiry fields, barcode, country of manufacture, language variants.
7. Pilot, then bulk. A pilot run confirms the line settings; bulk follows only after the pilot pouches pass the same checks, and retention samples are kept from both.

Nothing in that list is a certificate. If a buyer needs a test report for a specific claim, it is commissioned on the finished product for that project, and the report is issued by the laboratory that ran it.

MOQ and quotation

There is no single MOQ for a printed sachet, and a number quoted before the film and the artwork are known is a guess. Four things move the floor: whether new print plates are needed, the film structure, the fill weight, and how many SKUs share the run. A one-colour pouch on a stock laminate with buyer-supplied artwork sits at a very different entry point from an eight-colour matte pouch with a registered logo panel, a printed back panel in two languages, and a matching carton.

To quote accurately the team needs six inputs: pouch dimensions and target fill weight, film structure preference, sheet substrate and die-cut, formula direction with actives and their levels, print and artwork files, and the destination market. The reply states its assumptions and names which item is driving the price, so the buyer can decide what to relax. Lead time is confirmed against the production schedule at the time of order, not promised up front.

Buyer FAQ

Is the ginseng or collagen level shown on this page?

No. The folder contains packshots and a folder name, with no formula sheet. Inclusion levels are whatever the buyer’s approved formula states, and they are confirmed on the pre-production sample and the specification sheet for that project.

Is this hydrogel or nonwoven?

The packshot shows a translucent pink gel sheet, and the folder name points to a gel format, but substrate is a specification decision. Buyers who need a specific material should name it in the brief and approve it on a physical sample.

Can the pouch be sold without a carton?

Yes — that is the format’s advantage. The pouch still needs a barcode position, a batch and expiry field and a compliant back panel, so the artwork is not optional just because the pack is soft.

Can the fill be 30 g instead of 25 g?

The 25 g figure is what the reference pouch prints. A different fill changes the pouch size and the seal area, and it has to be re-approved on a filled sample rather than assumed from the packshot.

What is the GOLW spelling on the reference?

It is mock artwork on a supplier reference, not a brand name. Buyer artwork replaces the whole front panel, and the proof round is where spelling, ingredient names and fill weight are checked before plates are cut.

Can you print a “glass skin” claim?

That depends on the market and on the evidence the brand holds. The phrase is generally treated as an appearance descriptor, but it has to sit on a label whose other claims are consistent and supportable. The supplier prints the wording the brand’s regulatory adviser signs off.

What do you need from me to start?

Sachet size and fill weight, film preference, sheet material and die-cut, formula direction with actives, artwork files and the destination market. With those six, the reply is a quotation with its assumptions written out.

Where to read next

The bio-collagen day-and-night sheet mask brief covers a nonwoven route with a different cost base. The hydrogel five-mask carton shows how a gel sheet is priced when a rigid box joins the project. For buyers assembling a seasonal range, the collagen mask gift-set teardown explains assortment packing. The full manufacturing scope sits under products.

Start a ginseng mask sachet brief

Send the pouch size, the fill weight, the sheet direction and the market you are selling into, and the Guocui team will reply with the questions that a quotation depends on — film structure, print method and the artwork items that have to be approved before a plate is made. Open the contact form and attach the artwork if you already have it.