Private Label Silicone Scar Stick – OEM/ODM Manufacturer
Direct answer: this product is a twist-up silicone scar stick — a solid stick that deposits a thin silicone film over the appearance of the skin and travels in a pocket or a wash bag without a jar, a spatula or a pump. Guangzhou Guocui Biological Technology Co., Ltd. supplies it as a private label OEM/ODM project, so the stick diameter, fill weight, silicone level, fragrance, tint and outer carton are set from the brand’s brief rather than from a fixed catalogue item. The reference packshot in the product folder carries a blank “your logo” panel for that artwork. The folder holds packshots only: no clinical report, no stability file, no certificate and no declared fill weight, so nothing of that kind is asserted on this page.

Product positioning
Scar care has been sold in jars and tubes for so long that the format itself has become the category convention. A stick changes three things at once, and each one is a merchandising decision rather than a chemistry one.
First, application. A jar of gel needs a fingertip, which means the product is used at a bathroom shelf and nowhere else. A stick is applied directly, on the move, through clothing-free skin contact, which moves the habit from a nightly routine to something a buyer can carry. Second, dose control. A twist-up mechanism delivers roughly the same amount per pass, so a 15 g stick and a 30 g stick behave predictably in use and in reorder forecasting. Third, shelf presence. A slim stick occupies a peg or a counter unit that a 50 g jar cannot, which matters to pharmacy chains and travel-retail buyers more than the formula does.
The reference unit is a matte blush cylinder with a two-part body: a printed upper section and a plain twist base. The print carries “SCAR REPAIR” in a vertical stack, “SILICONE STICK” as a subtitle, a “your logo” block at the top and a three-line “RESTORE SMOOTH CONFIDENCE” sign-off near the base. That is supplier artwork, not a claim set. The wording has to be reviewed against the destination market before print, because “repair” and “restore” are treated as efficacy language in several regulated markets, and silicone scar products are classified differently from one jurisdiction to the next — a cosmetic in some, a medical device in others. Our job is to build the stick to the buyer’s approved wording and classification, not to decide that classification for them.
It is also worth saying what this page is not. It is not a scar-removal product and it makes no healing promise. Silicone works by sitting on the surface and holding moisture in; the visible result depends on the scar, the user and the duration of use, and no honest supplier can promise a percentage improvement. Buyers who need a clinical claim need a clinical programme, which is a separate and much longer project.
Suitable buyers
Four buyer profiles brief this item well:
- Pharmacy and derma-cosmetic brands that already sell a scar gel and want a second format for the same shopper, usually positioned as the on-the-go or handbag version.
- Brands building a post-procedure or sensitive-skin range, where a stick sits beside a balm and an ampoule without repeating the jar logic of the existing line.
- Travel, mini and kit assemblers who need a sealed unit that survives a pouch, a hotel amenity box or a subscription mailer without leaking.
- Marketplace and e-commerce sellers launching an own-brand scar item where the differentiators are the format, the print and the carton, not a new active.
It is a weaker fit for buyers who need a documented clinical dossier at the quotation stage, for buyers whose market treats every silicone scar product as a device requiring registration before sale, and for buyers who want a fill weight below the practical minimum for a twist mechanism. Those three questions are worth settling before artwork is commissioned, because each of them can change the tooling path.
SEO and buyer keywords
Sourcing searches for this item fall into four groups. Product-form queries (“silicone scar stick”, “scar repair stick”, “scar balm stick”) are the highest-intent and the ones this page is built around. Trade-route queries (“silicone scar stick manufacturer”, “scar stick OEM”, “private label scar care supplier”) bring in buyers who already know the format. Customisation queries (“custom logo scar stick”, “private label scar stick wholesale”) come from brands with artwork in hand. Market queries (“scar care supplier for pharmacy”, “post-procedure skincare OEM”) come from distributors assembling a range.
Two keyword traps are worth flagging. “Medical grade silicone” is a specification statement that needs a material certificate and a defined standard behind it; the folder supplies neither, so the phrase stays out of our copy until a buyer’s specification defines it. “Removes scars” and “clinically proven” convert well and are indefensible without a study; they belong to the buyer’s regulatory review, not to a supplier page. The safe vocabulary is about appearance, moisture retention, feel and format — which is also the vocabulary that survives a marketplace audit.
Custom formula directions
The formula brief is where a stick stops being generic. Five variables drive most of the decisions:
- Base architecture. An anhydrous silicone-and-wax matrix gives a dry, non-tacky film and a long shelf life; a silicone-in-water emulsion gives a cooler, lighter feel but needs preservation and a tighter stability programme. Both are buildable; the choice follows the skin feel the brand wants and the claims it intends to make.
- Silicone level. The product folder is filed as a 60% silicone stick, and the pack print itself carries no percentage. What ships is the level written into the buyer’s approved specification, and it is confirmed on the pre-production sample rather than inherited from a folder name.
- Structure and heat stability. Stick hardness is a balance between pay-off on skin and survival in a hot container or a tropical warehouse. A softer stick feels generous in a temperate market and collapses in a 45 °C shipment, so the hardness target is set against the destination climate, not the lab bench.
- Supporting actives. Centella extract, allantoin, panthenol, vitamin E and bisabolol are common companions in this category and are all feasible in a stick. Each one carries its own claim boundary, and an active added for the ingredient list rather than for a supported function is a cost with no story attached.
- Sensory and tint. Fragrance-free is the default for scar positioning; a faint tint can make the film less visible on darker skin tones, which is a real product benefit in markets where the category has historically ignored it.
None of these directions is a promise about the reference unit. They are the axes a buyer can move, and each move is priced and sampled separately.
Packaging options
The mechanism is the packaging decision that matters most. A plastic twist base with an inner pusher is the volume option and the one in the reference photo. A paper or bagasse tube with a twist disc is the sustainability option, and it constrains both the fill weight and the heat tolerance. A click-advance mechanism sits between the two on cost and gives a more precise dose.
Around the mechanism, the practical variables are stick diameter (which sets the perceived value and the print area), cap style (domed, flat or colour-matched), decoration (single-colour print, two-colour print, soft-touch lacquer, metallised band) and the secondary pack. For retail, a printed folding carton with a window or a blister on a card both work; for e-commerce, a slim carton with a tamper seal is usually enough. Kit builders often want the stick in a sleeve rather than a carton so it can sit in a set alongside a balm or an ampoule. Structural and print work runs through our custom packaging service.
Sample and QC workflow
The sequence below is the plan an order is built on, not a claim that the reference packshot has already passed it.
- Brief and format sample. Fill weight, stick diameter, mechanism type, silicone level and print direction are fixed in writing, and a stock mechanism sample is sent so the buyer can feel the pay-off before formula work starts.
- Formula sample. Two or three base variants are made against the brief and assessed for pay-off, film thickness, tack, dry-down and colour. The buyer picks one, and the pick is recorded as the approved reference.
- Compatibility and stability. The chosen formula goes into the chosen mechanism and is checked for stick hardness, heat behaviour, cap fit, leakage under inversion, and interaction between the product and the inner parts. Scope and duration are agreed with the buyer and run to a documented OEM quality-control protocol; a stick that passes at 25 °C and fails at 45 °C has not passed.
- Pre-production sample. Printed body, matched cap, filled stick and carton dummy, approved against the brief. Artwork changes after this point usually mean new print tooling.
- Inline and pre-shipment checks. Print registration and colour against the approved standard, fill weight on sampled units, mechanism cycle count, cap torque, carton barcode scan, and a photo set of the finished lot before release.
Anything that has to be certified — material declaration, microbial testing, heavy-metal limits, device registration — is a laboratory or regulatory scope added to the plan. A packshot cannot stand in for any of it, and we would rather say so before the purchase order than after.
MOQ and quotation
Minimum order quantity is quoted per configuration rather than published as a single figure, because the mechanism, the fill weight, the print method and the carton all move the minimum in different directions. A paper tube with a two-colour print and a plastic stick with a single-colour print are not the same conversation.
Five inputs make a quotation accurate: the fill weight and stick diameter, the mechanism preference, the silicone level and any supporting actives, the decoration and secondary pack, and the destination market. Artwork status is the sixth and the one that most often changes the price. No lead time is stated on this page, because a date quoted before the mechanism, the stability scope and the inspection plan are fixed would be a guess. Send the inputs through the contact page and the reply comes back with the assumptions written out.
Buyer FAQ
Is the stick 60% silicone?
The folder is filed under that name, and the pack print in the photo shows no percentage. The level that ships is the one written into the approved specification, confirmed on the pre-production sample. We do not treat a folder title as a specification.
Can the stick be classified as a cosmetic in our market?
That depends on the market and on the claims on the pack, not on the supplier. Some jurisdictions treat silicone scar products as devices. We build to the classification the buyer’s regulatory adviser confirms, and we can supply the formula and material documentation that adviser needs to make the call.
Will it survive shipping to a hot climate?
That is a hardness and mechanism question, tested rather than assumed. The hardness target is set against the destination climate and checked in a heat test whose conditions are agreed with the buyer.
Can we add centella or allantoin?
Yes, both are routine in this category and both are feasible in a stick base. Each active carries its own claim boundary, so the wording is agreed alongside the formula rather than after it.
Can we have a tint for darker skin tones?
Yes. A light tint reduces the visibility of the film and is one of the more useful differentiators in a category that has historically shipped clear gel only. The tint is matched on a sample, not on a screen.
Do you supply clinical or efficacy data?
No clinical dossier exists for the reference unit, and this page makes no efficacy claim. If a brand needs a study, it is commissioned as a separate project with its own protocol, timelines and cost.
Related manufacturing reading
Buyers comparing formats usually read the silicone and centella scar gel case for the jar route, and the scar repair cream brief for the emulsion route. The OEM/ODM overview explains how a private label programme is structured from brief to shipment.
Start your scar stick project
Send the fill weight and diameter, the mechanism preference, the silicone level and actives, the decoration plan and the destination market. We will come back with a quotation, the assumptions behind it and a sample plan — or tell you which part of the brief needs a decision first. Start at contact, or browse the wider product range.
