Skip to content
GUOCUI BIO TECH Skincare OEM/ODM

Private Label Hydrating Bubble Clay Mask – OEM/ODM Moisture Deep Cleansing

Direct answer: the Private Label Hydrating Bubble Clay Mask is a self-foaming clay mask supplied as an OEM/ODM project by Guangzhou Guocui Biological Technology Co., Ltd., and it sits in a five-mask bubble range as the moisture-positioned variant. “Hydrating” is the merchandising name carried by the reference pack, not a measured claim: no hydration percentage, corneometry reading or clinical result is published on this page, because the product folder contains packshots of the jar and the texture only. There is no formula sheet, no stability report and no ingredient declaration in that folder, so nothing below should be read as a specification of the liquid inside the photographed unit.

Next step: request a private label quote for this bubble mask, or send your jar format, variant count and label brief to the Guangzhou Guocui team.

Reference packshots

Product positioning

A foaming clay mask is bought twice: once by the buyer who reads a specification, and once by the shopper who watches it change on someone’s face. That second purchase is the reason this format survives in a crowded mask category. The paste sits in the jar as a normal clay, then lifts and expands into foam after application, which gives a brand something to film, something to demonstrate at a counter and something a reviewer can describe in one sentence. None of that is a skincare result; it is a visible event, and visible events are what short-form video rewards.

The hydrating variant has a specific job inside that range. A five-variant bubble series needs one SKU that can be sold to the shopper who is not chasing a concern – the one replacing a mask they already liked, buying a gift, or adding a second jar because the first one worked as a routine. Moisture language does that work better than any active-led story, because it does not ask the buyer to self-diagnose. It also travels: a hydration message reads the same in a dry winter market, on a long-haul flight, and in a coastal city where air conditioning does the drying instead of the climate.

There is a commercial catch worth stating early. The five variants share a platform and a filling line, so the cost of adding the sixth variant is mostly artwork and a colour code, not a new tool. That is attractive for a range builder and dangerous for a catalogue: five pages that describe the same jar with one adjective changed compete with each other in search and read as filler to a buyer. This page is written as the moisture brief specifically – what changes when moisture is the positioning, what has to be tested, and what a buyer should decide before artwork. The brightening variant carries the opposite argument, and the 30-second original is the format’s reference point.

Suitable buyers

Four profiles brief this variant well, and they ask for different things:

  • Range builders in social commerce. Sellers who already run a mask line on TikTok Shop or a live-selling channel and want a second, calmer SKU beside a deep-clean hero, so the range is not one repeated promise.
  • Gift and seasonal assemblers. Buyers building a mask set or an advent-style box who need one variant that will not narrow the audience – moisture is the safest shelf-mate for a purifying or firming jar in the same carton.
  • Distributors in dry or cold markets. Markets where humidity is low for half the year, where a clay mask without a moisture story is a harder sell in the winter planogram.
  • Brands entering masks for the first time. A foaming clay is a lower-risk first mask than an acid or a retinoid product: the demo is visible, the claim language can stay cosmetic, and the packaging route is a stock jar.

The fit is weaker in three cases. A brand whose whole identity is clinical or active-led will find the foam reads as novelty rather than efficacy, and should lead with a different format. A buyer who needs a measured moisturisation claim for advertising should plan the instrumental study first, because the page cannot supply a number and the artwork cannot either. And a buyer who wants a single-jar launch should expect the range economics above to work against them: the variant logic only pays back when at least two jars share the carton design.

SEO and buyer keywords

Sourcing queries for this format fall into four groups, and the wording tells you how far along the buyer is. Format queries – “bubble clay mask”, “self-foaming clay mask”, “oxygen bubble mask” – come from buyers still choosing a product type. Manufacturer queries – “bubble mask OEM”, “private label clay mask manufacturer”, “foaming mask supplier” – come from buyers who have chosen the format and are filtering suppliers. Customisation queries – “private label hydrating mask”, “custom jar clay mask”, “bubble mask with own label” – come from buyers holding artwork, a jar preference or a variant plan. Compliance and logistics queries – “clay mask cosmetic claim”, “mask stability testing”, “airless versus jar for clay mask” – come from buyers whose regulatory or operations team is already in the conversation.

This page answers the first three directly and refuses to guess at the fourth. Where a supplier page would normally print a number, this one says what the reference pack shows and what has to be confirmed on the buyer’s own sample. That is a deliberate trade: a page that invents an active percentage or a pH value is a liability to whichever brand copies it into a listing.

Custom formula directions

The formulation conversation for a self-foaming clay starts with the foam, not with the humectant, because the foam decides whether the product can be sold at all. The directions below are the ones a brief usually covers; each is set by the buyer and confirmed on a sample rather than assumed from this page.

  • Clay base and foam behaviour. The clay blend sets the paste body, the expansion height and how long the foam holds before it collapses. A denser, slower foam reads as a treatment; a fast, airy lift reads as entertainment. Activation speed and bubble intensity are adjustable, and the sample is where that adjustment is judged.
  • Humectant strategy. Glycerin, hyaluronic acid or a botanical moisture direction are the usual briefs for this variant. The level matters less than the after-feel: a clay mask that leaves a tight film undoes the moisture story at the sink, which is the moment a repeat buyer decides.
  • Clay-to-emollient balance. More emollient softens the paste and shortens the visible foam; less keeps the classic clay snap. This single ratio usually explains why two buyers describing “hydrating” end up approving samples that feel nothing alike.
  • Fragrance and colour. A colour-coded range needs the tint to survive the jar’s light exposure and the foam’s aeration. Fragrance is the most common cause of drift in both, so it is challenged before artwork is locked.
  • Preservative and water activity. A clay paste with free water is a hostile place for some preservative systems and a comfortable one for others. The system is chosen against the clay load, the pH target and the jar’s headspace, then challenged in a preservative efficacy test appropriate to the destination market.

No percentage, pH figure or ingredient declaration is quoted here. Those belong to a formula sheet issued for a specific project, and the reference folder for this unit does not contain one.

Packaging options

The photographed reference unit is a jar with a wide mouth and a printed label panel. Around that anchor, the usual routes for this format are:

  • Jar. 50 g and 100 g are the standard fills, in PET, PP or glass with a screw lid or a dome. A wide mouth is not cosmetic: it lets a shopper see the paste and lets a reviewer get a finger or a spatula in without a fight.
  • Tube. A laminated or extruded tube travels better and doses more hygienically, at the cost of the jar’s shelf presence and the visible paste.
  • Sachet set. A 5 x 10 g sachet set is the sampling and gift route, and the cheapest way to let a buyer test two variants side by side before committing to jars.
  • Pump. An airless or pump jar suits a thinner paste and keeps the surface unopened; it also removes the finger-in-jar objection that some markets raise in reviews.
  • Decoration and carton. Silkscreen or label on the jar, then a unit carton or a printed display tray. A five-variant gift set multiplies artwork but not tooling, which is why the series pack is usually designed before the individual cartons.

Two decisions are worth taking at brief stage because they are expensive later: whether the foam is meant to be seen through a clear jar or discovered after opening, and whether the variant is identified by lid colour, label band or carton only. Lid colour is the cheapest signal and the hardest to change once a mould is ordered.

Sample and QC workflow

The sequence below is how a private label clay project of this type is run. It describes the process, not a calendar; the duration depends on the jar tool, the fragrance and the documentation the destination market asks for.

  1. Brief and feasibility. Market, positioning name, fill weight, jar format, variant count and target quantity are fixed in writing. Anything left open here becomes a change order later.
  2. Base selection. A clay base is proposed against the foam behaviour and after-feel described in the brief; the buyer approves the direction before any sample is made.
  3. Lab sample and foam trial. Expansion height, activation speed, foam stability over the wear time, rinse behaviour and residue are assessed against the approved brief.
  4. Compatibility and stability. Paste against jar, lid liner, label adhesive and carton, held under accelerated conditions; this is where lid corrosion, label lift and colour drift are caught.
  5. Artwork proof. Panel fit, ingredient list, net content, warnings, batch and manufacturer details, barcode placement – checked before plates are made.
  6. Pre-production and QC. Fill weight against declared net content, seal integrity on a sample lot, foam behaviour on the production paste rather than the lab batch, label registration, carton print and drop check.
  7. Shipment release. Retained samples, inspection record and packing list are matched to the approved standard before the lot leaves.

Testing is commissioned per project. Stability, microbial and packaging compatibility work can be arranged for a specific formula and market. Nothing in the reference folder for this unit is a test report, and the artwork on the pack is not one either.

MOQ and quotation

First-run quantity for a clay mask is decided by the packaging before the formula. A stock jar has a low entry point; a bespoke mould carries a tooling line that has to be amortised over the run. Decoration comes second: a printed label tolerates a shorter run than direct silkscreen, because screens are charged once. The variant count is third, since each lid colour or artwork version is quoted as its own line even when the paste is shared. The fourth variable is the sachet set, which is usually a separate filling line and a separate minimum from the jar. Documentation is the fifth: a market that asks for a testing dossier adds a fixed cost that does not scale down with volume.

A quotation comes back fastest when the request states the destination market, the fill weight, the jar or tube route, the decoration method, the number of variants, and whether the buyer needs stability or compatibility testing arranged. Requests missing those points usually return as a question rather than a price. This page does not publish a standard lead time, and any figure given without a project scope should be treated as an estimate.

Buyer FAQ

Is the hydrating variant a different formula from the other four?

It is a different brief on a shared platform. The clay base, the foaming system and the filling line are common to the series; the humectant direction, the fragrance and the colour are where the variants separate. Whether that amounts to a different formula sheet depends on the buyer’s own specification, which is why the sample stage matters more here than in a single-SKU project.

Can we claim a moisturising effect on the label?

Only with substantiation that the destination market accepts. “Hydrating” as a product name and a measured moisturisation claim are two different things, and the second needs a study the buyer commissions. This page publishes no such figure, and a supplier who offers one without a report is describing artwork.

Does the foam change the fill weight?

No – the fill weight is the paste in the jar. The foam changes the volume the paste occupies after application, which affects how much a user perceives per use, and therefore how many uses a 50 g jar seems to deliver. That perception is worth testing on a sample panel before the pack copy promises a number of applications.

Is a clear jar or an opaque jar better?

Clear shows the paste and the colour code, which helps at shelf, but exposes the product to light for its whole shelf life. Opaque protects the tint and the fragrance and hides separation. The choice is a stability question as much as a design one, and it is usually settled during compatibility testing.

Can the five variants ship as one gift set?

Yes, as a multi-variant series pack. The set is a carton and artwork project rather than a new formula project, but each variant still needs its own label approval, and the set’s outer carton needs a compliant ingredient and net content statement for every unit inside.

Can we start with one variant and add the others later?

Yes, provided the jar, lid colour system and carton structure are chosen with the later variants in mind. Adding a variant afterwards is cheap on tooling and expensive on artwork if the first carton was designed as a single-SKU pack.

Where to read next

If the range plan is the open question, the purifying variant and the firming variant complete the set; the custom packaging overview covers decoration and carton choices before a proof, and the OEM quality control guide explains how a sample becomes a released lot.

Start a bubble mask brief

Send the destination market, the fill weight, the jar or tube route, the number of variants and the label you already hold, and the first reply will be a feasibility note rather than a price list. The product range shows the other mask and skincare formats built on the same filling lines, and the private label programme explains how a brief becomes an approved sample. To open a project with Guangzhou Guocui Biological Technology Co., Ltd., use the contact form.

Get OEM/ODM insights and claim-safe wording guides.

No spam. Unsubscribe anytime. One email every 3-4 days max.